Get matched with top roof ice and snow removal pros in Glenwood, GA

When starting the engine, you typically leave the choke on a snowblower in the "choke" or "closed" position. After starting, let the engine run for a few minutes to warm up. Then, gradually open the choke, moving it to the "open" or "run" position, allowing more air into the engine and transitioning to a normal fuel-air mixture. The exact duration varies based on the snowblower model and ambient temperature, but as a general rule, you should open the choke once the engine has stabilized and runs smoothly, typically within a few minutes.

Be careful when choosing a product to help you remove ice from your wood deck. Never use sand, gravel, or salt, since these items can damage and scratch the wood. Instead, look for chemical de-icers that are marked as safe for wood decks or use hot water to melt snow and ice.

You can use hot water to melt ice from your driveway, but there are some serious caveats. Very hot water can quickly melt ice and remove it, which is helpful if you’re very short on time and need a solution ASAP. However, it will only work across a small area, after which there’s a chance the water will freeze again. The sudden clash of temperatures is dangerous for fragile materials, notably windows and other glass, so you’ll want to keep the water away from your car.

Both rock salt and ice melt are naturally occurring salts. Rock salt is sodium chloride, which is the same as table salt. Ice melt products can be made from a combination of salts like magnesium chloride and calcium chloride or can be those salts alone.

Rock salt comes in large crystals, so it helps provide traction on icy surfaces, whereas ice melt products need to be mixed with sand to provide traction. Ice melt products work at lower temperatures than rock salt, so they might be a better choice if you have a harsh winter climate.