Top-rated structural engineers.

Get matched with top structural engineers in Dexter, GA

Enter your zip and get matched with up to 5 pros

Need a pro for your structural engineering project in Dexter, GA?

Select your specific project to find the pro for you.

Find Structural engineers in Dexter

Avatar for Matrix Technology Services

Matrix Technology Services

No reviews yet

Matrix Technology Services

No reviews yet
12 years of experience

Matrix Technology Services is an Oklahoma grown company founded and operated by a born and raised Oklahoma Veteran. Our commitment to quality and customer satisfaction will not be matched. With over 20 years of experience in electronics and low voltage wiring, we bring a unique combination of abilities and qualifications. We are a Bicsi Certified company. Knowledge and education are an integral part of our operation and philosophy. We seek to provide only the most qualified ICT cabling professionals in the industry. Contact us today to see how we can improve your ICT experience.

Matrix Technology Services is an Oklahoma grown company founded and operated by a born and raised Oklahoma Veteran. Our commitment to quality and customer satisfaction will not be matched. With over 20 years of experience in electronics and low voltage wiring, we bring a unique combination of abilities and qualifications. We are a Bicsi Certified company. Knowledge and education are an integral part of our operation and philosophy. We seek to provide only the most qualified ICT cabling professionals in the industry. Contact us today to see how we can improve your ICT experience.


3D Scan Projects 007 LLC

No reviews yet

3D Scan Projects 007 LLC

No reviews yet

3D Laser Scanning, for remodeling, and new projects EAC(Engineering, Architectural, Constructions), Arts, Sculptures and Others. Our Services includes Free quotes/estimates. Save time and money using fast, low-cost 3D laser scanning services. We can help you visualize any remodeling, or new constructions for your Home, Office, and Lands for any new Home or commercial projects. Our Team are fast and efficient with over 16 years of experiences on Engineering and constructions.

3D Laser Scanning, for remodeling, and new projects EAC(Engineering, Architectural, Constructions), Arts, Sculptures and Others. Our Services includes Free quotes/estimates. Save time and money using fast, low-cost 3D laser scanning services. We can help you visualize any remodeling, or new constructions for your Home, Office, and Lands for any new Home or commercial projects. Our Team are fast and efficient with over 16 years of experiences on Engineering and constructions.


Avatar for HC Construction & Grading

HC Construction & Grading

1.00(
2
)

HC Construction & Grading

1.00(
2
)
25 years of experience

HC Construction & Grading has been serving GA,NC,SC sense 2000. We conduct all of our jobs with top quality work and saftey. Our goal is to make sure that our customers get the best quality of services. We are happy to help in anyway we can.

"Stay away from this company. Hired them 7 years ago to replace a shingle roof with a metal roof. Had a few leaks that were due to what we thought were screws popping out. When a significant leak appeared in 2020, we contacted them to find out what the problem was and they came out to "fix" the issue. Owner stated that the roof was improperly installed but that he fixed the issue 100%. Two weeks later, had massive leaks in new places. Contacted several different roofing companies for estimates all of which stated they have NEVER seen such a botched job. Nothing was put between the metal and the plywood causing major moisture issues, screws were put in on top of old washers that cracked allowing water to come in, flashing was missing ALL OVER THE ROOF causing water to penetrate thru into the house. Screws were completely missing where they just left holes, screws were screwed in sideways at an angle allowing water through. The metal roofing was cut too short to where the water didn't even reach the gutters causing water to run down behind the gutter rotting the facia boards away and the strips to attach the metal to the plywood weren't even screwed into the rafters of the roof so they were completely loose. I tried to give them the opportunity to fix the problems and to consult with another roofer about the issues going on and he refused and said to take him to court. A judgment has been issued against him and have been told that they have done this to several people where we live. I would highly advise not hiring them for anything unless you want to have to pay for it to be redone again. I now have to replace my entire roof after 7 years when it should have lasted me at least 25 years! Apparently they aren't licensed as well even though homeadvisor states that they verify the proper licensing."

BRENDA K on April 2021

HC Construction & Grading has been serving GA,NC,SC sense 2000. We conduct all of our jobs with top quality work and saftey. Our goal is to make sure that our customers get the best quality of services. We are happy to help in anyway we can.

"Stay away from this company. Hired them 7 years ago to replace a shingle roof with a metal roof. Had a few leaks that were due to what we thought were screws popping out. When a significant leak appeared in 2020, we contacted them to find out what the problem was and they came out to "fix" the issue. Owner stated that the roof was improperly installed but that he fixed the issue 100%. Two weeks later, had massive leaks in new places. Contacted several different roofing companies for estimates all of which stated they have NEVER seen such a botched job. Nothing was put between the metal and the plywood causing major moisture issues, screws were put in on top of old washers that cracked allowing water to come in, flashing was missing ALL OVER THE ROOF causing water to penetrate thru into the house. Screws were completely missing where they just left holes, screws were screwed in sideways at an angle allowing water through. The metal roofing was cut too short to where the water didn't even reach the gutters causing water to run down behind the gutter rotting the facia boards away and the strips to attach the metal to the plywood weren't even screwed into the rafters of the roof so they were completely loose. I tried to give them the opportunity to fix the problems and to consult with another roofer about the issues going on and he refused and said to take him to court. A judgment has been issued against him and have been told that they have done this to several people where we live. I would highly advise not hiring them for anything unless you want to have to pay for it to be redone again. I now have to replace my entire roof after 7 years when it should have lasted me at least 25 years! Apparently they aren't licensed as well even though homeadvisor states that they verify the proper licensing."

BRENDA K on April 2021



Fabrication and sales of, above ground, solid steel, tornado, hurricane and storm safe rooms.


Skiver Contracting

No reviews yet

Skiver Contracting

No reviews yet
25 years of experience

Georgia licensed & insured general contractors. Family owned & operated with over 30 years combined experience! 1 year warranty on all craftsmanship. We guarantee there will never any hidden charges or fees & all consultations are free.

Georgia licensed & insured general contractors. Family owned & operated with over 30 years combined experience! 1 year warranty on all craftsmanship. We guarantee there will never any hidden charges or fees & all consultations are free.



Project Cost Solutions

No reviews yet

Project Cost Solutions

No reviews yet
16 years of experience

Project Cost Solutions, Inc. assist homeowners and general contractors with making informed decisions on matters of cost by providing independent, objective, accurate cost estimates in the planning & designing phase through course and completion of your construction project. Owners have traditionally relied on contractors or design professionals to provide cost estimates. The inherent problem with this model is that these groups control the cost of your project; which leads to greater profitability for them. Ready to Start Your Project? So are we. Contact us today to get started.

Project Cost Solutions, Inc. assist homeowners and general contractors with making informed decisions on matters of cost by providing independent, objective, accurate cost estimates in the planning & designing phase through course and completion of your construction project. Owners have traditionally relied on contractors or design professionals to provide cost estimates. The inherent problem with this model is that these groups control the cost of your project; which leads to greater profitability for them. Ready to Start Your Project? So are we. Contact us today to get started.


EHM

4.50(
16
)

EHM

4.50(
16
)
Customers say: Quality work
71 years of experience

EHM is a structural moving and elevating company that also specializes in foundation repair and replacement. We have been working in the Midwest since the Great Floods of 1993. We specialize in severely comprised foundation issues. We can elevate, level, pier or replace a wall or your entire foundation. We do not do mudjacking, waterproofing or minor crack repair.

"I did not get the service that we originally talked about I am very unhappy"

Donna S on August 2021

EHM is a structural moving and elevating company that also specializes in foundation repair and replacement. We have been working in the Midwest since the Great Floods of 1993. We specialize in severely comprised foundation issues. We can elevate, level, pier or replace a wall or your entire foundation. We do not do mudjacking, waterproofing or minor crack repair.

"I did not get the service that we originally talked about I am very unhappy"

Donna S on August 2021

Structural Engineering questions, answered by experts

Yes, they offer plans for repairs or reinforcements to address issues.

The easiest way to tell if a wall is load bearing is to check if it’s an exterior wall or if it runs perpendicular to the joists above and below it (or parallel to beams). Exterior walls are almost always load-bearing, and walls that run under beams or parallel to them are also usually load-bearing. There are exceptions to these rules, and walls that don’t fit into these categories can still be load-bearing. If you’re unsure, hire a structural engineer to look at your home to assess whether or not the wall is structural.

Structural engineers typically charge between $100 and $250 per hour, but many jobs won’t be based on a per-hour fee. Instead, the structural engineer will offer a flat rate for the inspection and structural calculations. The flat rate for a structural engineer costs an average of around $550, but you could see prices ranging from $300 to $800, depending on the complexity of your project and how easy it is to access certain parts of your home for the inspection.

Stone, marble, and brick are common building materials of Neoclassical architecture, though you will also find wood flooring and a range of natural stone tiles. Since several home styles fall under Neoclassical architects' umbrella, a range of building materials—including traditional wood framing—will make an appearance.

In many areas, advice from a structural engineer or an architect will be required by your building department before you can remove a wall, but even if it’s not necessary, it’s a good idea. Accidentally removing a load-bearing wall—even if a general contractor advises that it’s safe—can cause major structural damage, putting you and your family at risk and potentially costing thousands or tens of thousands of dollars in property damage.

The Dexter, GA homeowners’ guide to structural engineering services

From average costs to expert advice, get all the answers you need to get your job done.