Get matched with top stone countertop pros in Blakely, GA

If you have light renovation experience, you should be able to build your own countertop made from wood or laminate. These tend to be the most DIY-friendly materials, but you’ll need to be comfortable using a circular saw and taking precise measurements. When it comes to installation, leave anything that involves plumbing, electricity, or gas lines to the pros.

Yes, Corian® and other solid surface materials can be cut with standard woodworking tools, such as a circular saw or a jigsaw. However, it is crucial to use the correct type of blade to avoid damaging the material.

For a circular saw, a tungsten carbide-tipped blade is required; a triple chip grind blade is highly recommended. For a jigsaw, you should use a fine-tooth down-cutting blade. Do not use blades designed for cutting wood, as they can cause microfractures that weaken the edges of the countertop. A diamond blade is also unnecessary, as those are designed for harder materials like natural stone, which Corian is not.

After cutting, the edge will be rough. It is essential to sand and smooth the cut edge to prevent microfractures, which can eventually compromise the integrity of the countertop.

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.

The best way to save money on countertop installation is to choose an affordable material. For example, if you have a busy kitchen and need durability, choose a more affordable but lasting material like granite countertops. Likewise, if you don't use your countertops often, you can use a softer material that costs less than more sturdy ones. 

Another way to cut costs is to remove and dispose of the existing countertops yourself, if possible. That way, countertop installers can get straight to placing the new feature, reducing labor costs.