Get matched with top sonic cleaning pros in Millsboro, DE

You should avoid using a pressure washer on any surface or item that could be damaged by the high-pressure spray, as some materials are too delicate to withstand the force.

Key items and surfaces to avoid include:

• Electrical Components: Never pressure wash electrical systems, as water can cause short-circuits and create a safety hazard. This includes utility meters, breaker boxes, electrical outlets, generators, and HVAC or air conditioner units.

• Delicate and Fragile Materials: Fragile items can crack, shatter, or be stripped by the pressure. Avoid pressure washing windows, glass, light fixtures, shingled roofs (especially asphalt), and stucco.

• Painted, Stained, or Sealed Surfaces: Unless your goal is to strip the finish, do not pressure wash painted surfaces, stained wood (like decks), or anything with a protective seal that could be stripped away. Be especially cautious with older surfaces that may contain lead paint.

• Soft Woods and Certain Decking: Delicate surfaces like softwood, composite decking, and antique or wooden patio furniture can be etched or damaged. If you must wash wood, use a lower-powered pressure washer with a wide-angle nozzle to prevent damage.

• Living Things: Never use a pressure washer on people, pets, or plants. The force can cause serious injury and will destroy landscaping.

Soft washing chemicals typically consist of a mix of sodium hypochlorite (or a chemical component of bleach) and water. While sodium hypochlorite and bleach are often thought to be the same thing, there is one small but key difference between the two: sodium hypochlorite comes in powdered rather than liquid form, which means that it’s also more concentrated and more effective from less product overall.

If you’re painting your home or monitoring a job as it’s being completed, squash the issue ASAP if you notice paint is getting onto the roof. Keeping it clean is one of the keys to extending your roof’s life.

Removing latex paint before it dries is much easier and lowers the risk of damaging your shingles (more on that below). Simply spray the spot with a hose for one to two minutes to clear away the drying paint. In general, this is a good way to remove ugly stains from your roof without using chemicals.

To keep your PVC roof in top condition, keep it clear of debris, ensure drainage systems are working properly, and inspect it for damage regularly. Keeping the roof clear of ponding water, sharp debris, and other hazards will prevent damage. Have your roof inspected by a professional once a year to ensure the seams aren’t damaged or separated—faulty seams can lead to destructive water intrusion.