Top-rated land surveyors.

Get matched with top land surveyors in Rangely, CO

Enter your zip and get matched with up to 5 pros

Need a pro for your land surveying project in Rangely, CO?

Select your specific project to find the pro for you.

Find Land surveyors in Rangely

Land Surveying questions, answered by experts

ALTA/ACSM surveys are the most comprehensive type of land survey and, as such, tend to be the most expensive. These surveys have standardized guidelines and reports and are used in many kinds of real estate transactions to ensure consistent and accurate information is available for properties.

Building a road on a slope requires careful planning and will normally require a drainage system underneath to prevent flooding and damage to the road over time. Your professional may lengthen your road to create switchbacks if the slope directly to your home is too steep, as there are regulations for maximum road slope. The drainage system will help prevent runoff from the higher side of the slope from damaging the asphalt or concrete. Keep in mind that building a road on a slope isn’t a good DIY project, as a lot can go wrong.

Land survey reports have a boatload of information relevant to several scenarios. Here are the types of information contained with a survey, though it depends on your chosen type of land survey. Exact boundaries and dimensions of a given property General topography, including both natural and artificial landmarks Location of utility fixtures, like water mains Confirmation of any easements or encroachments on a piece of property Assessment of land elevation to buy flood insurance Updated information to add to a pre-existing property map

You will find a collection of licensed land surveyors in your area. Your real estate agent or construction manager may also be able to recommend a trusted professional. When speaking with prospective pros in your area, ask the land surveyor if they are licensed in the state, have liability insurance, and can quote you a fee before starting.

There are a couple of ways you can determine the depth of your well. One method is to use a device called a well sounder. This tool has a long measuring tape containing a sensor to alert you once the end reaches the water. 

Or you can DIY it by using a long tape measure with a half-filled bottle of water attached to it. Lower the tape measure into your well. Once you feel tension on the tape, you’ll know the bottle has reached your static water level. This will give you an approximate idea of your well’s depth.

The Rangely, CO homeowners’ guide to land surveying services

From average costs to expert advice, get all the answers you need to get your job done.