Top-rated roofers.

Get matched with top roofers in Whiteriver, AZ

Enter your zip and get matched with up to 5 pros

Need a pro for your roofing project in Whiteriver, AZ?

Select your specific project to find the pro for you.

Find Roofers in Whiteriver

Ascended Constructions
New to Angi
Asphalt Shingle Roofing - Install or Replace

Serving Whiteriver, AZ and surrounding areas

Approved (Corporate)

In business since 2023

Offers commercial services

We’re a family owned and operated company that values honesty and integrity, and stands behind our work. We offer over 40 years of industry experience. We specialize in Asphalt Shingle Roofing installation, replacement, and repairs. Our services are customized to the individual project, paying close attention to the details of each project that we're involved with. We look forward to building long-term relationships with our clients and guarantee your satisfaction!

1 neighbors recently requested a quote
Avatar for Sunshine Experts,llc
Sunshine Experts,llc
4.7(
179
)
Asphalt Shingle Roofing - Install or ReplaceAsphalt Shingle Roofing - Install or Replace - For BusinessAsphalt Shingle Roofing - Repair+26 more

Serving Whiteriver, AZ and surrounding areas

In business since 2001

Free estimates

Credit card accepted

"Solar tube installed efficiently and cleanly with no disruption. Technician installer Rick explained the options well, and made a good job of the break through to the roof, finishing off with an unobtrusive fitting that matched our Spanish tile roof. Very pleased with the result which has brought much needed light yo an otherwise dull hallway.
"
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+20

Recommended by96%of homeowners
T & S Roofing
5.0(
3
)
Flat, Foam, or Single Ply Roofing - Install or ReplaceFlat, Foam, or Single Ply Roofing - Install or Replace- For Business

Serving Whiteriver, AZ and surrounding areas

In business since 1987

Free estimates

Credit card accepted

"Tim took over a project that an unqualified handyman started! The handyman ruined a part of my roof while he tried to install a patio roof. Unfortunately we didn’t discover how unqualified the first person was until he took forever to start the project and kept saying he was going to finish and never did! Tim had redone our roof last Fall so I asked him to look at the project - he finished in a little More than 2 weeks and it’s beautiful! Would recommend this contractor for any project you have !"
Response rate100%
Recommended by66%of homeowners
Avatar for Slender & Sons, LLC
Slender & Sons, LLC
4.9(
11
)
Flat, Foam, or Single Ply Roofing - Install or Replace- For Business

Serving Whiteriver, AZ and surrounding areas

In business since 2003

Free estimates

Credit card accepted

"This is a great company run by its owner Andrew, a great guy. No sooner than I requested HomeAdvisor for pro recommendations for my flat roof problems Andrew called within about 5 minutes. Found him to be very personable on the phone and made an appointment for an estimate for the next day. He was right on time and he listened to my every concern about the problem with my flat roof which I had been trying to fix. Having worked with other roofing contractors as a Pastor with Churches having flat roof problems, I found Andrew to be very knowledgeable. Upon his examination of my roof we agreed to have the repairs made and the roof spayed with urethane and then sprayed and back rolled with elastomeric cool coat. Very Reasonably priced. I found the Slender and Sons crew to be very friendly, courteous, and diligent. Would recommend this company to anyone and everyone. This is at the very least a 5 Star Company all around."
Response time10 mins
Response rate100%
Recommended by100%of homeowners
Showing 1-10 of 42
Roofing questions, answered by experts

The proper specifications for furring strips can vary, so you should always consult the roofing manufacturer's guidelines or your roofer. However, general recommendations are as follows:

  • Thickness: Furring strips are typically 1 to 1-1/2 inches thick, meaning standard 1-by or 2-by lumber works well. In areas with extreme winds, a thinner strip may be preferred to limit how much air can get under the roof and cause uplift. A thicker strip can add slightly more insulation but will also increase installation costs.

  • Spacing: The recommended spacing for furring strips is between 12 and 24 inches apart on center. Proper spacing is crucial for ensuring good airflow, adequate drainage, noise reduction, and better energy efficiency. The ideal spacing can depend on the roof's pitch and the specific type of metal roofing being installed.

A roof pitch multiplier is an accurate way to calculate roof square footage, and it’s handy for purchasing the correct amount of materials. To determine your roof pitch multiplier, you'll need to calculate the roof slope, square it, and add it to 144. Next, find the square root of the total and divide it by 12. The answer is your roof pitch multiplier. Once you know the roof pitch multiplier, multiply it by the total square feet of your building to determine the total roof surface area.

A metal roof can last anywhere from 15 to over 100 years, with an average of 50 years, depending on the material, installation, and environment. The specific metal is a key factor: aluminum roofs may last 20 to 45 years, while steel can last 30 to 60 years. Tin can last for up to 75 years, and more durable options like zinc, stainless steel, and copper can last from 80 to over 100 years. Factors that can shorten a metal roof's lifespan include living in a coastal region with corrosive salt air, improper installation (such as laying over old shingles), and failing to inspect and replace fasteners, which may wear out before the panels.

To cap off a chimney flue, start by measuring its width, length, and diameter, if it’s circular. Purchase a cap that fits the flue, and decide whether you want a temporary or permanent model. Then, slide or insert the cap onto the flue and secure it with a screwdriver. Be sure to avoid over-tightening the screws to prevent chimney damage. 

Ideally, you shouldn’t pay your roofer upfront unless you’re special-ordering materials. However, anything between 10% and 15% of the project’s cost is reasonable to pay upfront. Avoid making a final payment until after the roof gets completed.

The Whiteriver, AZ homeowners’ guide to roofing services

From average costs to expert advice, get all the answers you need to get your job done.