Best gutter repair and replacement pros near Tonalea, AZ

When you need to repair your galvanized gutters from leaks and caulk isn’t doing the job, you can solder your gutters with a roofer’s soldering iron. First, you’ll need to clean your gutters thoroughly with a wire brush and remove rust and oxidized paint. Next, you’ll make weld points on the gutter and solder over the connection until it’s completely smooth. You can also hire a roofing company near you to tackle this project.

Icicles don't necessarily mean your gutters are clogged or bad, but they can indicate an underlying issue. While clogged gutters can cause icicles to form, the problem could also be an ice dam on your roof from poor insulation. In that case, melting snow can refreeze in the gutter even without a clog. Regardless of the cause, the weight of the ice can damage your gutters or even rip them completely off the house. If you are unsure of the underlying problem, it's best to call a roofing company to assess the issue and implement a permanent solution.

Water should not be dripping behind your gutters. Rain dripping between your gutters and the fascia might indicate that the gutters are misaligned with the fascia board or there are loose screws in the gutters, allowing water to pass through. Start by checking for these issues and make repairs ASAP.

The duration of a repair job can range from a few hours to several days. Simpler issues may take 1-4 hours, while more complex work or extensive damage could take 1-3 days. The final timeline depends on the complexity of the problem, the extent of the damage, and the location of the work.