Get matched with top excavation pros in Polacca, AZ

Using a drill to bore holes in the stump's center speeds up the process, whatever method you use. If you don’t have a drill, you can still chainsaw or chisel the stump to make it hollow; it will just take more elbow grease and time. Steer clear of burning the stump to hollow it if you can’t drill some holes in it first. Otherwise, getting it to light, stay lit, and burn right through will be a challenge.

A trench that is less than 5 feet deep often doesn't require a protective system. Most residential trenches will not go this deep (the typical residential drainage trench is just 18 inches deep). In the event that an excavator needs to dig more than 5 feet beneath the surface, a protective system is required unless the excavation is in entirely stable rock.

It takes one hour to dig a 10-foot trench by hand. Use a trenching shovel with a sharp tip and a long head. Plan for more time if your soil is heavy or rocky. Consider renting a trencher if you’re digging a long or deep trench or if you have challenging soil or terrain. 

In the United States, a depth of 36 inches (three feet) for underground water lines is the accepted industry standard. This depth varies from location to location based on local conditions. In areas with colder winters, they may be buried deeper to prevent frozen well water pipes : This is usually at least six inches below the frost level. The International Plumbing Code calls for a minimum of 12 inches below grade.