Get matched with top lawn care providers in Marked Tree, AR

While a rented dumpster can handle a wide variety of materials, there are significant restrictions on what is allowed. Generally, you can dispose of most non-hazardous household junk, yard waste, and construction debris.

Accepted items typically include:

• Furniture, carpets, old linens, and toys

• Wood and yard debris

• Small appliances and excess trash

• Renovation waste like old finishes, building debris, and roofing materials (unless they contain lead paint or asbestos)

However, you cannot put toxic, flammable, or hazardous materials in a dumpster. Prohibited items almost always include:

• Paint, gasoline, oil, and other fuels

• Household cleaners and other chemicals

• Electronics, batteries, and tires

• Refrigerators, hot water tanks, and medical waste

Since regulations can vary by location and company, it is essential to check with your dumpster rental provider for their specific list of accepted and prohibited items before you begin.

This depends on how many leaves there are. Mowing over dry and crisp leaves with a bagging attachment saves most homeowners a lot of time. If you have a smaller lawn and few leaves to mulch, you can put the leaves into a stand-alone mulcher resembling a wood chipper and collect the mulch from a hopper. This prevents having to do multiple passes with a mower.

For minor unevenness, you don't necessarily need to remove grass before leveling. You can apply a topdressing mixture to fill in low areas and even out the surface. However, for more significant unevenness or deep depressions, it might be necessary to temporarily remove the grass to ensure proper leveling and soil compaction. After filling and leveling, you can replace the grass or consider reseeding the area.

It’s possible to over-mulch leaves. If the leaf mulch is thick enough that it’s blocking and smothering the grass, that’s a problem. Ideally, you should still be able to see the grass when you’re done mulching to ensure its ability to continue growing. The solution is to make another pass at the top layer of leaf mulch to collect some of the top layer.