Get matched with top structural engineers in Lake City, AR

Although the two terms are closely related and often used interchangeably, pier and beam foundations and crawl spaces are different things. A pier and beam foundation is made up of concrete piers and wooden beams and creates a space under the home known as a crawl space. There are several types of foundations that create crawl spaces, often collectively known as “crawl space foundations,” but the crawl space itself is separate from the foundation. 

Squeaky floors don’t always mean structural damage. Usually, it’s caused by friction somewhere inside your floor—whether it’s a loose floorboard or a gap between the subfloor and joists. If there is structural damage, you’ll notice other signs like soft or sagging floors, cracks that go from the wall to the ceiling, and horizontal cracks on your foundation.

First, most contractors will have a structural engineer create a report and plan for your project to ensure it’s safe to cut into the load-bearing wall. The contractor will then excavate around the wall, if necessary, measure the opening—allowing for additional space to fit and level the door, and then cut the doorway out. They will likely install a steel lintel as a header over the door for support. Once the doorway is cut out, they’ll demolish the concrete using sledge hammers and masonry chisels, clean up the surrounding concrete, and seal around the door with masonry mortar. 

Most load-bearing walls are exterior, though they can also be interior.