Top-rated sink repair pros.

Get matched with top sink repair pros in Section, AL

Enter your zip and get matched with up to 5 pros

Need a pro for your sink repair project in Section, AL?

Select your specific project to find the pro for you.

TRUSTED BY SECTION, AL HOMEOWNERS

  • Average homeowner rating star icon4.6
    Average homeowner rating
  • Verified reviews icon45
    Verified sink repair services reviews

Find Sink repair pros in Section

No results for Sink repair pro in

Try adjusting your search criteria.
Sink Repair questions, answered by experts

To avoid the high costs of plumbing repairs, watch for potential problems. If you see any signs of a leak, consider hiring a professional plumber. A pro can assess the level of damage and make the appropriate repairs.

Plumbing leaks are always better tackled immediately. You can also fix any minor repairs yourself or ask the plumber if they can use less expensive materials.

Deteriorated seals, O-rings, or gaskets are common culprits behind a leaky sink after you’ve turned off the water—especially if your sink is older than 15 years. Inspect each of these mechanisms in your sink for signs of corrosion or looseness, then replace the worn-out part to fix it. Older sinks may be worth replacing if several of the parts are worn-out.

The cost to pipe a sink depends on the location. Generally, you’ll spend somewhere from $150 to $500 installing plumbing under a kitchen sink and $200 to $800 installing plumbing under a bathroom sink. These costs could rise if you don’t have a plumbing hookup nearby and you have to reroute plumbing from outside of your kitchen or bathroom.

Porcelain and enamel sinks have very similar appearances, but they aren’t the same. Porcelain is a ceramic made from natural clay, while enamel is a strong powder that’s glazed over a metal sink. Use a magnet to determine whether you have an enamel or porcelain sink. If a strong magnet sticks to the sink, it’s likely enamel. If it doesn’t, you probably have a porcelain sink. You can also use the model number on the sink (often found on the underside of the bowl) or information from the manufacturer to determine the material.

Try to tighten the clevis crew and adjust the lift rod if your sink stopper won’t stay up. Sometimes your screws became too loose over time, and as a result, there wasn’t enough resistance to keep the sink stopper up. If a damaged lift rod is the cause of the problem, you will need to replace it with a new rod.

The Section, AL homeowners’ guide to sink repair services

From average costs to expert advice, get all the answers you need to get your job done.