Get matched with top deck maintenance specialists in Hokes Bluff, AL

Yes, but it works best with lightweight snowblowers, the single-stage models or electric versions. Also, you need to have a rubberized intake edge on the ground and preferably rubberized auger paddles, not a metal version. Otherwise you may chip or damage the surface as you work. When it doubt, let the snow lie.

You can also use a snow blower on leveled gravel, but only if you carefully adjust the intake height so it doesn’t kick up the gravel and turn it into flying missiles.

PVC decking can get slippery when wet because it’s made from plastic. However, composite and wood decking can also be slippery when wet. It’s best to wear shoes with grippy soles when walking on a wet deck, no matter the material, and to be extra cautious not to slip and fall down.

The best way to sand a deck is by cleaning it, sanding the boards and stairs with 60- or 80-grit sandpaper, and sanding the railings and posts with 80-grit sandpaper. You should sand in the direction of the wood grain to avoid damaging the timber. When sanding your deck, use medium pressure and aim for an even sand. Pressing too hard with a sander can damage decks, as most are softwoods.

If you want to use the space beneath your second-story deck, then yes, an under-deck drainage system is worth it. Having a drainage system in place lets you run power to the area, so you can install a ceiling fan, lighting, TV, or other appliances to create a comfortable outdoor living space.