Get matched with top stucco pros in Bynum, AL

You can apply stucco to wood by wrapping it with grade D waterproof paper, installing trim accessories such as metal lath, control joints, weep screeds, casing beads, and expansion joints, and applying the stucco in three layers. You’ll need a scratch coat, brown coat, and finish coat, all applied with a trowel and screeded with a darby or straight edge. Each should cure for two days before you apply the next one.

Costs range from $6 to $10 per square foot, depending on material type and project scope.

Yes, you can apply the stucco yourself, but it is a time- and labor-intensive project, especially on the exterior of a whole house. DIY stucco is better suited for repairing stucco siding or siding a smaller building, such as a shed or garage. Since most of the cost of stucco siding goes to labor, you can cut down significantly on the total if you’re up for the challenge.

Stucco is considered a type of cladding because it includes a built-in ventilation layer, a weatherproof membrane beneath that, and, often, a layer of insulation to improve building efficiency. The multiple layers of stucco—the scratch coat, the brown coat, and the finish coat—also create a more complex building membrane, so it’s more accurate to call it cladding. However, homeowners and contractors alike refer to stucco as siding.