Get matched with top masons in Kodiak, AK

Professionally done brick repointing can last 20 to 30 years, sometimes longer. However, the exact lifespan depends on several factors, including the quality of the mortar, the skill of the mason, and exposure to weather. If you live in an area with harsh weather or frequent freeze-thaw cycles, you may need to repoint more often. Repointing that is done as a DIY project may only last 10 to 15 years. It's time to repoint when you notice signs of mortar failure, such as crumbling or missing mortar, holes, or vines growing between the bricks. Regular inspections can help you catch these issues early.

When painting brick, each application method has pros and cons. Spraying is much faster but may not penetrate the porous surface of the bricks. Rolling is effective for getting paint into the bricks but doesn't work as well on the mortar. Brushing is very time-consuming and also won't penetrate beyond the surface. For the best results, a combination of spraying and rolling is often recommended. If you use a roller, choose a thick option (at least a half-inch) and ensure the paint gets into all the crevices for even coverage.

When painting brick, each application method has distinct advantages and disadvantages. Spraying is significantly faster but may not penetrate deeply beyond the surface layer. Rolling is effective for working paint into the brick's texture but can be less effective on mortar joints. If you opt for a roller, choose a thick nap of at least a half-inch to ensure paint gets into all the crevices for even coverage. Using a brush is generally not recommended as it is very time-consuming and provides poor surface penetration. Ultimately, a combination of spraying followed by back-rolling is often the best strategy for a durable and even finish.

You may not need a hammer drill if you’re planning on drilling one or two very small diameter holes in brick. For holes with a diameter of 3/16-inch or less, a regular drill with a masonry bit can do the job. However, the bit will heat up quickly, and the process will take significantly longer than with a hammer drill. Prepare to cool your drill bit down in a bucket of water more often.