How Much Does It Cost to Move Washer and Dryer Hookups in Washington, DC? [2026 Data]

Washington, DC’s elevated labor rates and higher cost of living mean homeowners need to budget carefully for washer-and-dryer hookup relocation. The average cost to move washer and dryer hookups is $1,307, with most projects ranging from $926 to $1,960. In this guide, we’ll walk you through how key factors such as component installation, drywall repairs, and labor rates affect your total cost so you can plan accordingly.

Washer and Dryer Hookup Relocation Cost Factors 

When relocating washer and dryer hookups in Washington, DC, component installation, drywall repairs, and new machines will have the biggest impact on your total.

Installing a Washing Machine Cut-Off Valve

A cut-off valve is necessary to stop the water supply to your washing machine. Your washing machine cut-off valve will likely cost $10 to $35 per line.

Building a Drain Line for the Washer

Relocating your washing machine gets trickier when plumbing costs are involved. And one major plumbing cost for relocating your washer and dryer is installing a drain line. Depending on how close it is to the existing plumbing, the price could range anywhere from $390 to $2,005.

If you try to tackle this work yourself and make a mistake, you’ll need to get a plumber in pronto. However, costs will be significantly higher. Emergency plumbing costs up to three times as much as standard plumbing.

Installing Electrical Outlets and Circuits

Your washer should run on a standard 120V outlet, while dryers need a high-powered outlet (240V) for proper power. The cost to install a new outlet is around $325 if you need one for the washer, and about $545 if you need a 240-volt plug for the dryer. The type of dryer plug on your unit will impact electrical costs. You also may need to cap an existing gas line, which costs around $135.

Running a Gas Line (Gas Dryers Only)

If you’re installing a gas dryer, you’ll need to factor in the cost of running gas lines to your new laundry room. Prices vary, but the cost for a new gas line typically falls between $220 and $5,400 or more, based on how far you run the lines. Expect to pay around $20 per linear foot.

Dryer Vent Installation

Dryers need a place to push out that hot air, so don’t forget to consider installing a dryer vent. A new dryer vent costs an average of $110 but can reach $1,090, depending on the vent's length.

Repairing Drywall

After you finish installing new hookups, you’ll likely have some minor drywall repair needs. Minor drywall repair can cost as little as $110, and your plumber or electrician may even include it in their labor cost. Sometimes, when moving your washer and dryer, you’ll uncover mold or water damage that needs further attention. In these cases, it’s best to call a mold remediation pro to test and suggest the best course of action.

Installing the New Machines

Once you’ve set up everything, you’ll have to think about installing the units themselves. If you’re buying new units, many will include installation in the cost. If that’s not the case, you can find an appliance installation service near you and get it done for about $55 to $190 per unit.

Washer and Dryer Hookup Pro Costs

Appliance pros in Washington, DC, charge $55 to $180 per hour for washer and dryer hookup relocation. The older plumbing systems and tight utility spaces of the area often push rates to the higher end of that range. 

When comparing quotes, confirm your pro has the proper licensing through the D.C. Board of Industrial Trades. You may also require a permit through the D.C. Department of Buildings, which can add $75 to your total.

Additional Pros to Consider Hiring 

Most washer-and-dryer hookup relocations require an electrician to install the new 120V washer outlet and 240V dryer circuit. Electricians in Washington, DC, charge $50 to $95 per hour, depending on your project's complexity.

Does Relocating Washer and Dryer Hookups Increase Home Value?

Relocating your washer and dryer hookups in Washington, DC, often won’t directly increase your home's value, but it can speed up the resale process. Moving laundry from a dark basement to an upper floor enhances your home's functionality, helping attract more buyers and improve its marketability in the city’s competitive resale market.

How Angi Gets Its Local Cost Data 

To help homeowners plan their next project, Angi provides readers with carefully researched cost data and upholds strict editorial standards. We start with national average project costs, which we collect by analyzing competitor information, retailer material costs, and input from professional contractors. We then apply local price index data to calculate location-specific estimates that reflect what homeowners typically pay in their local area. To do that, we use data from the U.S. Bureau of Economic Analysis (BEA), including its Regional Price Parities (RPPs), which measure price differences across cities. This helps us account for differences in labor, materials, and overall cost of living, so estimates in higher- or lower-cost areas better reflect real-world local pricing.

Every estimate undergoes a thorough editorial review to verify accuracy, consistency, and alignment with observed market conditions.

Want to help us improve our cost data? Send us a recent project quote to [email protected]. Quotes and personal information will not be shared publicly.