How Much Does It Cost to Move Washer and Dryer Hookups in Phoenix, AZ? [2026 Data]

The cost to move washer and dryer hookups in Phoenix, AZ, averages $1,240, with most homeowners paying from $878 to $1,859. Complex relocations that involve extending plumbing, electrical, or gas lines can increase total prices to $5,165. Moving washer and dryer hookups in Phoenix, AZ, also requires hiring licensed and certified professionals and obtaining permits to ensure code compliance, safety, and overall value of your project.

Washer and Dryer Hookup Relocation Cost Factors

The cost to move washer and dryer hookups in Phoenix, AZ, is based on the distance from existing utility connections, drywall repairs, and new machine installation.

Installing a Washing Machine Cut-Off Valve

A cut-off valve is necessary to stop the water supply to your washing machine. Your washing machine cut-off valve will likely cost $10 to $30 per line.

Building a Drain Line for the Washer

Relocating your washing machine gets trickier when plumbing costs are involved. And one major plumbing cost for relocating your washer and dryer is installing a drain line. Depending on how close it is to the existing plumbing, the price could range anywhere from $370 to $1,900.

If you try to tackle this work yourself and make a mistake, you’ll need to get a plumber in pronto. However, costs will be significantly higher. Emergency plumbing costs up to three times as much as standard plumbing.

Installing Electrical Outlets and Circuits

Your washer should run on a standard 120V outlet, while dryers need a high-powered outlet (240V) for proper power. The cost to install a new outlet and circuit is around $310 if you need one for the washer, and about $515 if you need a 240-volt circuit for the dryer. The type of dryer plug on your unit will impact electrical costs.

Running a Gas Line

If you’re installing a gas dryer, you’ll need to factor in the cost of running gas lines to your new laundry room. Prices vary, but the cost for a new gas line typically falls between $205 and $5,165 or more based on how far you run the lines. Expect to pay around $15 to $25 per linear foot. You also may need to cap an existing gas line, which costs around $130.

Dryer Vent Installation

Dryers need a place to push out that hot air, so don’t forget to consider installing a dryer vent. A new dryer vent costs an average of $105 but can reach $1,035 depending on the length of the vent.

Repairing Drywall

After you finish installing new hookups, you’ll likely have some minor drywall repair needs. Minor drywall repair can cost as little as $105, and your plumber or electrician may even include it in their labor cost. Sometimes, when moving your washer and dryer, you’ll uncover mold or water damage that needs further attention. In these cases, it’s best to call a mold remediation pro to test and suggest the best course of action.

Installing the New Machines

Once you’ve set up everything, you’ll have to think about installing the units and moving the washer and dryer. If you’re buying new units, many will include installation in the cost. If that’s not the case, you can find an appliance installation service near you and get it done for about $50 to $180 per unit.

Washer and Dryer Hookup Pro Costs

The cost to hire a local appliance pro in Phoenix, AZ, varies according to labor rates, permit fees, and other tradespeople you may need to hire.

Labor

Local plumbers or appliance pros in Phoenix, AZ, charge $45 to $210 per hour, though they may have flat fees for basic project scopes. If your project is more complex or involved, they may need to complete an in-person assessment to provide a custom quote. Plan to pay higher rates for plumbers who have more advanced certifications or if your job also requires plumbers to work on gas lines.

Permits

Relocating washer and dryer hookups usually involves both plumbing and electrical modifications, so you’ll need permits from the City of Phoenix Planning and Development Department before the project can proceed. In Phoenix, AZ, the single building permit model combines all trade work into one application, so you only need one application if you’re hiring plumbers, electricians, and other workers.

Permit fees are based on the estimated project value, including materials and labor. They start at $150 for projects up to $1,000, with higher costs for every additional $1,000.

Additional Pros to Consider Hiring

Moving washer and dryer hookups frequently requires hiring multiple professionals, depending on your project’s total scope. Homeowners often hire general contractors, for example, for hookup relocations that are part of a larger laundry room remodel. Your project may need these types of professionals:

• Electrician: $50–$105 per hour

• Dryer vent specialist: $50–$150 per hour

• Drywaller: $0.75–$2 per square foot

• General contractor: 10%–20% of total project cost

Does Relocating Washer and Dryer Hookups Increase Home Value?

Relocating washer and dryer hookups won’t directly increase your home’s value in Phoenix, AZ, but it can improve the overall appeal to buyers. Moving the appliances away from basements or uninsulated garages can protect the units from heat, increase energy efficiency, and improve accessibility. If you’re building a dedicated laundry room for the hookups, you can expect a 40% to 60% return on investment (ROI).

How Angi Gets Its Local Cost Data 

To help homeowners plan their next project, Angi provides readers with carefully researched cost data and upholds strict editorial standards. We start with national average project costs, which we collect by analyzing competitor information, retailer material costs, and input from professional contractors. We then apply local price index data to calculate location-specific estimates that reflect what homeowners typically pay in their local area. To do that, we use data from the U.S. Bureau of Economic Analysis (BEA), including its Regional Price Parities (RPPs), which measure price differences across cities. This helps us account for differences in labor, materials, and overall cost of living, so estimates in higher- or lower-cost areas better reflect real-world local pricing.

Every estimate undergoes a thorough editorial review to verify accuracy, consistency, and alignment with observed market conditions.

Want to help us improve our cost data? Send us a recent project quote to [email protected]. Quotes and personal information will not be shared publicly.