How Much Does Garage Door Panel Replacement Cost in Denver, CO? [2026 Data]

Garage service costs depend on your project and location. Check with a local pro for your specific job.

Get quotes from garage pros near you
No obligation · 100% free
Get quotes from garage pros near you
No obligation · 100% free
Cost Insights
  • Replacing a single garage door panel in Denver, CO, costs $370 to $952 on average.

  • The total cost depends on the number of panels, the door style, and any additional repairs.

  • Serious weather, such as hail or ice, may require multiple panel replacements, which are more expensive.

  • Hire a garage door pro in Denver, CO, with specialized knowledge who can safely replace garage door panels.

On average, garage door panel replacement costs $582 in Denver, CO. Most homeowners spend between $370 and $952, and the range varies greatly depending on the extent of the damage. Certain parts of the city are prone to hailstorms, which can cause significant damage that requires multiple panel replacements. Couple this with daily temperature swings that can warp hardware, and you may find yourself spending more than you anticipated. Here’s what you can expect when budgeting for this home project.

Garage Door Panel Replacement Cost Factors

Denver, CO, has a lot of extremes, including wet snow that can freeze garage doors and your driveway, hailstorms, and temperature swings. This can all lead to the kind of damage that requires a garage door panel replacement, but the total cost depends on how many panels you need to replace, the style of your doors, and if you need to repair other parts of your garage at the same time.

Number of Panels

In Denver, CO, it’s common to replace multiple panels, especially if your garage door has sustained storm damage or the lower panels have been damaged from ice. If you need to replace more than 50% of the panels on your door, it’s usually more economical to replace your entire door.

Number of PanelsAverage Cost Range to Replace
1$250–$800
2$500–$1,600
3$750–$2,400

Door Style

There are a few different types of garage doors. Here’s how much you’ll pay to replace a panel for each type.

Door StyleAverage Cost
Sectional$265–$530
Roll-up$160–$425
Tilt-up$425–$2,015
Side-sliding$265–$3,180
Side-hinged$215–$1,700

Sectional Garage Doors

Expect to pay between $265 and $530 to replace a panel for this type of garage door. Sectional garage doors are the most common type of door. They use four to six hinged panels that move along a track from the floor to the top of the garage.

Roll-Up Garage Doors

You’ll pay between $160 and $425 to replace a panel for roll-up garage doors. These are much smaller and more affordable, making them ideal for small garages, but the labor is often more intensive. These doors are made of aluminum, steel, or wood, and they last longer than other types of garage doors.

Tilt-Up Garage Doors

Replacing a canopy door costs between $425 and $1,485. This style uses one solid panel that lifts off the garage floor and into the ceiling, with part of it protruding outward. Unfortunately, you can’t replace just one part of the door like you can with other styles. This means that tilt-up doors are the most expensive to repair since you need to replace the entire door.

A similar style of tilt-up doors is an up-and-over garage door, which costs $745 to $2,015 to replace. Much like a canopy tilt-up, these consist of just one panel, so you’d have to replace the entire thing.

Side-Sliding Garage Doors

Replacing a panel for a side-sliding garage door could cost anywhere from $265 to $1,060 or more, depending on the material and the size of the panels. These garage doors are a bit less common, sliding to the side as the name suggests, rather than up and over.

Sometimes, these systems can use single-panel doors, in which case you can expect to pay between $425 and $3,180 to replace the entire thing.

Side-Hinged Garage Doors

Side-hinged doors swing open from the center, almost like opening a book, and can sometimes be called French doors. The cost to replace their panels should be a bit less since the doors are split in two. Expect to pay between $215 and $1,700 per side that needs replacing.

Materials

If you're just paying for the garage door panel, materials will cost between $160 and $850. If your garage door needs repairs at the same time, you may also have to pay for the cost of replacement springs, cables, a roller and track, sensors, chains, and other miscellaneous materials. All of these items together will cost between $160 and $585.

Garage Door Pro Costs

Most garage door pros in Denver, CO, charge $75 to $120 per hour for labor. A panel replacement usually takes one to three hours, but it will take longer if you need to replace multiple panels or do additional repairs (hardware replacements and minor adjustments are common).

Since the high altitude exposes your door to more UV rays, the color may degrade faster. This means older doors often require an additional step of painting and finish-matching, which increases labor costs.

If the job is an emergency and you need a same-day service, you can expect a surcharge of $50 to $100. Your homeowners insurance may cover the cost of storm-related damage.

Does Replacing Garage Door Panels Increase Home Value?

Replacing a garage door panel won’t add value to your home. This type of job is considered regular maintenance and helps preserve existing value. Potential buyers may ask for a reduction in price if they notice your door is significantly damaged or has other inconvenient issues, like needing to be manually opened due to a broken opener.

If you need more than a handful of panels replaced, you’re usually better off installing a brand-new door. This offers a return on investment (ROI) of about 90% to 200%. In Colorado, you may qualify for an energy rebate if your replacement door comes with a high R-value (R-value is the level of insulation). This can help reduce the up-front cost and also save you on energy costs in the long run.

How Angi Gets Its Local Cost Data 

To help homeowners plan their next project, Angi provides readers with carefully researched cost data and upholds strict editorial standards. We start with national average project costs, which we collect by analyzing competitor information, retailer material costs, and input from professional contractors. We then apply local price index data to calculate location-specific estimates that reflect what homeowners typically pay in their local area. To do that, we use data from the U.S. Bureau of Economic Analysis (BEA), including its Regional Price Parities (RPPs), which measure price differences across cities. This helps us account for differences in labor, materials, and overall cost of living, so estimates in higher- or lower-cost areas better reflect real-world local pricing.

Every estimate undergoes a thorough editorial review to verify accuracy, consistency, and alignment with observed market conditions.

Want to help us improve our cost data? Send us a recent project quote to [email protected]. Quotes and personal information will not be shared publicly.

Need professional help with your project?
Get quotes from top-rated pros.

The homeowners guide to garage services

From average costs to expert advice, get all the answers you need to get your job done.