How Much Does Fiber Cement Siding Installation Cost in Tampa? [2025 Data]

Fiber cement siding installations in Tampa cost $6,284 on average, but most homeowners pay between $3,451 and $9,116. Final costs depend on everything from the shape and size of your home to how much prep work is needed before installation. In Tampa, that might mean addressing sun-faded paint, storm wear, or humidity-related damage before the installation starts. This guide covers what really goes into the cost to install fiber cement siding in Tampa, so you can plan accordingly.

Siding Installation Cost Factors

Many factors can affect fiber cement siding installation costs in Tampa. For instance, the city’s high humidity, frequent storms, and intense sun exposure can influence the amount of prep work required before installation even begins. And features like large porches, multiple stories, and detailed trim can extend the time and complexity of the job, especially if crews need to work around landscaping or tight property lines.

Home Size and Shape

Fiber cement siding is priced by the square foot, usually between $7 and $18 per square foot, so larger homes cost more to side. But your home’s shape also matters. Homes with complex layouts, curved walls, and detailed exterior features often take more time to side properly, which can increase your costs. 

Fiber Cement Type

The type of fiber cement siding you pick can impact your final cost. Traditional plank siding is popular for its simplicity and affordability, while panels are pricier but offer a great look for sleek, modern exteriors. 

Demolition and Prep 

In Tampa, pulling off old siding can reveal damage from years of heat, humidity, and storm exposure. It’s relatively common to uncover issues like warped sheathing, rotted trim, and mold hidden beneath the surface. These issues can extend the prep timeline and raise your costs, especially if materials need to be replaced before new siding can go up. 

Choosing fiber cement shingles can also make prep more involved, since each piece needs to be installed with care to prevent moisture problems in the long run. For these reasons, it’s a good idea to set aside 10% to 20% of your budget for any issues that might pop up during the prep and demo phases. 

Complexity

The complexity of your home’s design can also influence the cost to install siding. Tampa homes often feature stucco accents, curved walls, and mixed exterior materials that can complicate the siding installation process. These kinds of details require extra planning and precision, which can stretch both the timeline and the budget for the siding project.

Accessibility

Some Tampa homes are more accessible than others. For instance, some homes only have rear or side access, which means your crew needs to spend more time staging and transporting supplies. Crews may also have trouble accessing a home due to things like overgrown vegetation, limited street parking, and tight lot lines. Regardless of the reason why, if it’s tough for your pros to access all of the areas where siding needs to be installed, it’ll likely increase your labor rates. 

Post-Construction Cleanup

Once the siding goes up, there's usually a mess left behind. Tampa’s humid conditions often mean that siding projects leave behind warped wood, rotted trim, and moldy insulation that needs to be removed and hauled off. Most contractors will include basic cleanup in the estimate, but if your project leaves behind especially large amounts of debris, you may need extra disposal services.

Design Fees

Bringing in an architect for your Tampa siding project can cost anywhere from a few hundred to a few thousand dollars depending on the complexity of your design. But it can be a worthwhile investment, especially if you're updating a coastal home with unique architectural features or trying to blend new siding with stucco, tile, or other materials. 

Siding Installation Pro Costs

In Tampa, the cost of hiring a siding contractor goes beyond just what they charge per hour. You’ll also need to account for permit fees, required insurance coverage, and taxes. 

Labor Rates

Siding contractors in Tampa charge between $25 and $65 per hour, or $2 to $6 per square foot. Homes with storm damage, unique design features, or strict permitting requirements may need crews with specialized tools or certifications, which can cost extra, but it often pays off by avoiding code violations and costly do-overs.

Permits

In Tampa, you’ll need a building permit for siding projects. Fees start at $50 for projects valued up to $1,000, with an additional $5 added for every $1,000 beyond that. On top of the base fee, Florida requires a 2.5% state surcharge, with a minimum charge of $4. This percentage-based surcharge can drive up costs on larger jobs, so it’s a good idea to calculate fees ahead of time to avoid costly surprises once the project’s underway. 

Licensing and Insurance

In Tampa, siding contractors must be licensed by the state and registered with the city, though local registration has no added fees. State law requires liability insurance and workers’ compensation coverage, but the city only asks for proof of workers’ comp or exemption. Unlike some cities, Tampa doesn’t typically require contractors to list the city as an additional insured. With most requirements handled at the state level, overhead costs for Tampa contractors may be lower than in more regulated cities, which means you won’t see as many local compliance fees built into your final siding estimate.

Taxes

In Tampa, materials for fiber cement siding are subject to Florida’s combined sales tax, which is around 7.5%, depending on your exact location. Labor for residential siding isn’t taxed, as long as it’s itemized separately. If your contractor combines labor and materials into one charge, you may be taxed on the full amount, so it’s best to request a detailed invoice that clearly separates the two.

Additional Pros to Consider Hiring

Depending on the age, location, and condition of your Tampa home, your siding project might call for a few extra hands beyond the standard crew.

• Architect: If you're siding a historic home in neighborhoods like Hyde Park or Seminole Heights, an architect can help you stay true to the original design while upgrading your exterior. Their involvement comes with a cost, but it’s often worth it for homes where visual details matter.

• Structural Engineers: Florida’s storms, flooding, and heat can damage a home’s bones. If your siding removal uncovers sagging walls or waterlogged framing, you may need a structural engineer to assess the damage and guide repairs before new siding can go up. Structural engineer assessments cost $350 to $800.

• Asbestos Abatement Contractors: Some older Tampa homes still contain asbestos-based siding or underlayment. If there's any suspicion, Florida law requires you to bring in licensed asbestos pros for testing and removal, which costs between $1,200 and $3,300 depending on the scope.

Do Fiber Cement Siding Installations Increase Home Value?

Fiber cement siding boosts a home’s value by upgrading its aesthetics and durability. Its clean, upscale look appeals to many buyers, especially since it mimics wood without all the maintenance. In markets like Tampa, where heat, storms, and humidity can wear down lower-quality materials, fiber cement signals long-term quality, which can translate into stronger offers when it’s time to sell.

How Angi Gets Its Cost Data

Home is the most important place on earth, which is why Angi has helped more than 150 million homeowners transform their houses into homes they adore. To help homeowners with their next project, Angi provides readers with the most accurate cost data and upholds strict editorial standards. We survey real Angi customers about their project costs to develop the pricing data you see, so you can make the best decisions for you and your home. We pair this data with research from reputable sources, including the U.S. Bureau of Labor Statistics, academic journals, market studies, and interviews with industry experts—all to ensure our prices reflect real-world projects. 

Want to help us improve our cost data? Send us a recent project quote to [email protected]. Quotes and personal information will not be shared publicly.