Chain-Link Fence Cost in Denver [2026 Data]

The cost to install a chain-link fence in Denver averages $1,657, and most residents pay between $864 and $2,500. Your cost will largely depend on the size of your property and the complexity of the fence design, but fence height and material options can affect pricing, too.

Chain-Link Fence Cost Factors

Some homeowners in Denver, Colorado, pay as much as $4,400 to install a chain-link fence, but prices can sit as low as $460. There are a few important factors to consider if you want to get an accurate estimate before reaching out to contractors.

Length and Height

Chain-link fence installation costs $5 to $28 per linear foot, which includes materials and labor, with an average price range of $6 to $14 per linear foot. Contractors usually issue estimates with a per-linear-foot calculation, so the longer your fence needs to be to surround your property, the higher your installation costs will climb.

You’ll also need to consider the height of your fence, as taller fences require more materials and drive prices higher. If you just need a short fence to contain your dog, you’ll pay less than you would if you installed a tall fence for privacy. Here’s what you might pay based on chain-link fence height in Denver:

Type of Chain-Link Fence

The most affordable types of chain-link fences (galvanized and wood-post) start at $3 per linear foot. On the other hand, the most expensive type (wrought iron) can reach prices up to $70 per linear foot.

Here’s how the type of chain link fence affects the cost in Denver:

Diamond Size

“Diamond size” refers to how large the opening is between each link. A smaller mesh can offer a bit more privacy and security, but it requires more materials and drives material costs higher. The most common residential size is 2” x 2”, which costs $2 to $6 per linear foot. Decreasing the diamond hole to 1” x 1” will push costs up to between $5 and $11 per linear foot.

Gauge (Thickness)

The thickness of the chain that creates the links, otherwise called its gauge, influences the project cost, as it determines the cost of materials. Basically, the higher the gauge number, the thinner the metal strands, translating to a lower cost of materials.

Thicker strands last longer, provide more security, and are generally more resistant to rust and inclement weather, but they cost more. It may be worthwhile to consider upgrading to thicker strands in Denver, as cyclones, hailstorms, and other severe weather can limit the lifespan of more affordable materials.

Posts

Your fence needs posts to help it remain sturdy, and some options can add a unique appearance to your fence. Putting in basic posts costs an average of $2 per linear foot, or $20 per post. Often, contractors wrap this cost into the overall estimate, as you can’t have a fence without something to hold it together.

Land Clearing and Prep

You may need to budget some extra money for land preparation, which can include leveling your lot for a simpler installation and nicer appearance, or clearing debris, bushes, or trees out of the way. Denver is located in a river valley, so while the surrounding area is mountainous, the city itself is quite flat. As such, most homeowners won’t need to worry about land leveling. Land clearing should also be relatively affordable, as lot sizes in Denver are small.

• Land clearing cost: $150 to $2,000 per half-acre

• Land leveling cost: $600 to $2,100

Add-Ons

Chain-link fences are simple and offer minimal utility and almost no privacy. You may want to budget extra for add-ons to get more value out of your fence. You can use the table below and the length of fencing you need to estimate the cost of add-ons.

Since the lot size in Denver is well below average and neighbors are very close by, privacy features for chain-link fences are the most common options. Powder coating is another popular option in the city, as it helps your fence resist rust when exposed to the above-average snowfall in the area.

Fence Installation Pro Costs

On average, 50% of your total will go toward labor when you hire a fence company in Denver. Given the average cost of chain-link fence installation in the city, you’re looking at labor costs of between $800 and $2,250, or between $5 and $28 per linear foot.

When you hire a professional, they should pull all necessary fencing permits for you, but they’ll pass the permit fee onto you. The City of Denver charges an average permit fee of $35 for a chain-link fence installation. If your total project cost is over $2,000, you’ll instead pay a base fee of $35 plus $8 for every additional $1,000 worth of work.

Does a Chain-Link Fence Increase Home Value?

Adding a fence to your property can boost home value because it improves security and, in many cases, privacy. However, while chain-link fences offer security, they offer almost no privacy without add-ons, and they don’t have the best curb appeal. As such, it’s unlikely that you’ll see a significant bump in home value.

In cities with small lots and a high population density, like Denver, you can maximize your return on investment (ROI) by adding on privacy features, which help make your yard feel more secluded. Upgrading to a black chain-link fence costs more but can boost curb appeal and add value. Adding a powder coating can extend the life of your fence, which some buyers may be willing to pay a bit more for.

How Angi Gets Its Cost Data

Home is the most important place on earth, which is why Angi has helped more than 150 million homeowners transform their houses into homes they adore. To help homeowners with their next project, Angi provides readers with the most accurate cost data and upholds strict editorial standards. We survey real Angi customers about their project costs to develop the pricing data you see, so you can make the best decisions for you and your home. We pair this data with research from reputable sources, including the U.S. Bureau of Labor Statistics, academic journals, market studies, and interviews with industry experts—all to ensure our prices reflect real-world projects. 

Want to help us improve our cost data? Send us a recent project quote to [email protected]. Quotes and personal information will not be shared publicly.