How Much Does It Cost to Repipe a House in Columbus, OH? [2026 Data]

The cost to repipe a house in Columbus, OH, averages around $7,163, but it can range between $1,433 and $14,325. The main factors that affect the price are the home size and the type of materials. Homeowners will want to invest in piping that can withstand Columbus’ frigid winters. The number of fixtures and accessibility to the pipes will also determine the cost. This guide covers all the factors that influence the cost to repipe a house in Columbus so you can budget accordingly.

House Repiping Cost Factors 

The price you’ll pay a pro to repipe a house in Columbus, OH, depends on many factors, including the type of materials, pipe size, and the size of your home. For example, a larger home with more fixtures—such as sinks, showers, and bathtubs—will be more costly because it’ll require more piping and labor hours. Higher-quality piping, such as copper, is more expensive, but PEX is commonly used in Columbus homes because of its resistance to freezing temperatures and cost-efficiency.

Speak with your pro to determine which type of piping is best for your budget and home. That said, here’s a breakdown of the various factors that’ll determine how much you can expect to pay for repiping.

Size

Large homes have more plumbing fixtures and require longer runs for pipes and drain lines, so they cost more to repipe. Additionally, multistory homes cost more to repipe than single-story homes because you'll need more piping material to reach plumbing fixtures between floors.

Materials

There are three main types of piping materials: copper, CPVC, and PEX. Costs vary with the material. For instance, copper ranges from $2 to $8 per linear foot, while CPVC costs about $1 to $2 per linear foot. 

Remember that local codes can dictate the types of pipes you can use. Your plumber can recommend the best material for your home.

Number of Plumbing Fixtures

Proper piping is required for all of your home's fixtures, including toilets, sinks, and showers. The more fixtures you have, the more piping you'll need. Rough-in plumbing for a bathroom is costly, as getting pipes to precise locations is more labor-intensive than running plumbing behind walls. If you’re changing your home’s layout, expect to pay more for the total cost.

Diameter of Piping 

The size, or diameter, of your pipes also affects costs. Pipes used for waste drainage are wider than pipes designed to carry water. For the same type of piping, larger diameters will be more expensive. However, most drain lines consist of PVC, which is less expensive than copper, so drainpipes should still be more affordable than water supply lines.

Accessibility

If your pipes are in a difficult-to-reach location, expect to pay more for repiping your house. For example, pipes under concrete are more difficult to access than pipes behind drywall, so they cost significantly more to remove and replace.

Soil Conditions

The soil around your home can also affect the cost of repiping. For example, clay soil shifts over time, affecting the surrounding plumbing and leading to more costly installations. This is only a factor if you replace buried lines, like water mains, underground pool lines, and sprinkler lines.

Plumbing Pro Costs

In addition to material costs, you’ll need to budget for labor and permit fees. The cost to hire a licensed plumber in Columbus, OH, depends on their skill set and the company they work for. Since winter is the peak season in this region, demand for plumbers increases due to emergencies like burst pipes, which drives up costs.

Here’s what labor and permit fees can cost in Columbus.

Labor

Labor can account for up to 70% of the project’s total price. Plumbers in Columbus may charge by the job or by the hour, with rates ranging from $45 to $200 per hour. The price a pro will charge depends on their experience and the complexity of the job. For instance, a master plumber with the highest level of education can handle complex tasks, so they can command a higher rate. It’s best to hire a licensed plumber to repipe your house because they’ll ensure the job is done correctly and will comply with local codes and regulations.

Permits and Inspections

The city of Columbus, OH, requires a plumbing permit to repipe a house, and the fees can cost from $275 to $700. The permit should include two inspections in the cost. If a reinspection is required, it can cost between $75 and $150. The pro should handle obtaining all the necessary permits and inspections required to complete the project.

Add-On Services and Additional Pros to Consider Hiring

If it’s time to repipe your home, it’s also a good time to replace the water heater and main water line since you already have a professional plumber handy. Water lines that are over 50 years old are at the end of their lifespan and are at risk of pipe failures. Water line replacement costs between $1,570 and $3,360, and the process involves trenching your yard, which will destroy your lawn. So you may want to hire a professional landscaper to restore your yard and make it lush again.

Here are a few additional pros you may need to hire to assist in completing these projects:

• Water heater installation cost: $45–$200 per hour

• Foundation repair contractor: $150–$200 per hour

• Landscaper cost: $50–$100 per hour

• Driveway contractor: $50–$150 per hour

• Tree removal service: $150–$2,000 per tree

Does Repiping a House Increase Home Value?

There isn’t a specific return on investment for repiping your home, because buyers expect functional plumbing when they purchase a house. Aging infrastructure is common in older Columbus neighborhoods such as German Village and Franklinton, so if your home is in a historic area, it’s worth having a pro replace the piping. New piping can help prevent problems during home inspections and reduce the risk of a lower offer or losing the sale altogether.

How Angi Gets Its Local Cost Data 

To help homeowners plan their next project, Angi provides readers with carefully researched cost data and upholds strict editorial standards. We start with national average project costs, which we collect by analyzing competitor information, retailer material costs, and input from professional contractors. We then apply local price index data to calculate location-specific estimates that reflect what homeowners typically pay in their local area. To do that, we use data from the U.S. Bureau of Economic Analysis (BEA), including its Regional Price Parities (RPPs), which measure price differences across cities. This helps us account for differences in labor, materials, and overall cost of living, so estimates in higher- or lower-cost areas better reflect real-world local pricing.

Every estimate undergoes a thorough editorial review to verify accuracy, consistency, and alignment with observed market conditions.

Want to help us improve our cost data? Send us a recent project quote to [email protected]. Quotes and personal information will not be shared publicly.