Outdoor Faucet

An outdoor faucet, also called a hose bib or spigot, is the exterior water source that powers everything from garden hoses to pressure washers. These fixtures handle watering, car washing, and outdoor cleaning tasks throughout the year. Common concerns include leaks, freeze damage, and low water pressure. Whether you need repairs or a new installation, Angi connects you with local pros and helpful guides to keep your outdoor water flowing.

Related to Outdoor Faucet Service

Find Plumbers near you
Share your project details and we’ll match you with up to 3 available pros near you.
Common Outdoor Faucet Service Questions

While freezing pipes are less likely with frost-free hose bibs, even if you forget to winterize them, it’s still possible. That’s why it's recommended to take precautionary steps and still winterize this type of outdoor faucet when possible. Disconnecting hoses and draining any remaining water from the bib before freezing temperatures set in ensures optimal performance and longevity. This precautionary measure helps prevent damage to the faucet itself as well as any hose left connected during winter months.

While it’s possible to use an outdoor faucet in the winter, it might not be the best time to water your grass. Drawing water to your outdoor faucet increases the risk of that water freezing when you’re done with the faucet, especially if you don’t take the time to re-winterize your faucet. There are heated hose products you can buy to use in winter, but these can cost hundreds of dollars. It may be best to simply wait for the weather to warm up again.

No, you should avoid using antifreeze in your outdoor spigot to prevent freezing. Antifreeze can contaminate your water supply and harm the environment. Instead, employ safer and more effective methods for winterizing your spigot, such as draining the spigot and using insulation, to protect it from freezing temperatures.

Installing an outdoor faucet cover is very easy. You don't even need any tools because the covers are made of foam and don't require any screwing or drilling. All you need to do is loop the faucet cover over the faucet and press it against the wall firmly. On most models, a drawstring will pop out and you pull it back like you're tightening the hood on a jacket.

You need to turn off the water first so that there's no more water flowing to the hose bib outside. You'll need to shut the entire water supply off if it doesn't have its own shutoff valve. Next, remove the spigot handle, packing nut, and valve stem. Replace the stem washer and packing string, as these parts crack and harden over time which is why the hose bib keeps leaking. Put the faucet back on and test it, the leak should stop.