Get matched with top siding pros in Presidio, TX

You may only need to repaint fiber cement siding every decade or so, but you should clean it every six to 12 months, depending on your local climate. First, wash with a garden hose or similar low-pressure device (not a high-pressure washer, which can damage the material) to remove dirt and any large debris. Then, gently wipe down the surface with a soft brush or cloth in a side-to-side motion, following the grain of the fiber cement.

You cannot install clapboard siding on a bare, unprepared surface. Clapboard siding requires a clean, sturdy base made from plywood or similar materials, sometimes called backerboard. Then, it needs an underlayment or sheathing, a moisture membrane to help protect the exterior wall.

Note that sometimes clapboard siding is caulked as it’s installed for additional protection. We don’t suggest this: Caulking the siding can trap moisture inside the clapboards and lead to moisture damage over time. The siding needs some space to “breathe,” especially in rainy weather.

The best types of siding to withstand hail are fiber cement siding and engineered wood siding. Fiber cement siding is known for impact resistance, while some brands of engineered wood siding can withstand hail as big as 1 and 3/4 inches with no marks. Vinyl and aluminum siding are the most susceptible to hail.

Composite siding is very resistant to warping that can affect some other sidings. Because of its composition, this siding doesn’t have the same risks of moisture damage that can cause rotting, buckling, and warping. Composite material doesn’t warp in high temperatures the way some kinds of vinyl siding can.

That said, composite siding is not entirely immune from moisture damage. It should still be properly installed so that moisture can properly drain from behind the siding, and protected by eaves and clean gutter so the siding doesn’t get repeatedly soaked by rain, which could lead to damage.