Get matched with top mulch and topsoil pros in Olton, TX

A good driveway should have a solid base layer and a smooth surface layer of gravel. A base layer of larger gravel, around 1 to 2 inches, keeps the foundation stable and helps with drainage. For the top layer, smaller gravel, about 1/4 to 1/2 inches, compacts well and creates an even surface that’s easier to drive on. Using both ensures the driveway stays durable, drains properly, and doesn’t shift over time.

Yes, grounds count when calculating box fill. A single volume allowance is made when up to four equipment grounding conductors or equipment bonding jumpers enter the box. It’s important to account for all wires and fittings when calculating box fill. Beyond the first four, each additional grounding conductor should be counted as ¼ volume.

A gravel driveway costs from $1.25 to $1.80 per square foot, including materials and installation. Cost factors for this project include the type of gravel, its thickness, and the amount of site preparation required.

Consider these cost estimates for a 20-foot-long driveway:

• 1-car (240 square feet): $300–$432

• 2-car (480 square feet): $600–$864

• 4-car (960 square feet): $1,200–$1,728

Here are gravel driveways costs for a 50-foot-long driveway:

• 1-car (600 square feet): $750–$1,080

• 2-car (1,200 square feet): $1,500–$2,160

• 4-car (2,400 square feet): $3,000–$4,320

You don’t have to spend a small fortune to make big changes to your landscape. You can achieve a lot for well under $5,000, especially if you like a DIY challenge. With a landscaping budget of $5,000, you could tackle a project like building a simple patio or deck, sprucing up your existing landscape with new plants, mulching, and tree trimming, or adding an impressive water feature. You’ll have no shortage of possibilities if you budget wisely.