We are a small company the consists of only three employees. We normally do all the work required on a jobsite unless a third party is required for other services we don't offer. We except most methods of billing procedures. Materials must me purchased by customer needed for the job. Customer will only be charged for labor or special materials mentioned in the job contract!
We are a small company the consists of only three employees. We normally do all the work required on a jobsite unless a third party is required for other services we don't offer. We except most methods of billing procedures. Materials must me purchased by customer needed for the job. Customer will only be charged for labor or special materials mentioned in the job contract!
Receive dependable Construction Project Management in Houston, TX. Trust our Design Consultant and construction specialist to help you build your designs.
Receive dependable Construction Project Management in Houston, TX. Trust our Design Consultant and construction specialist to help you build your designs.
We are a small business based out of hunt county, Texas. We do offer commercial sub-contracting. We take checks, and cash as of right now. We also can do financing options, with a certain percentage down.
We are a small business based out of hunt county, Texas. We do offer commercial sub-contracting. We take checks, and cash as of right now. We also can do financing options, with a certain percentage down.
Southern Way Enterprises is a company that prides its self in perfection. All of our staff are knowledgeable, honest and hard working. We strive to impress all of our customers. Feel free to ask any questions.
Southern Way Enterprises is a company that prides its self in perfection. All of our staff are knowledgeable, honest and hard working. We strive to impress all of our customers. Feel free to ask any questions.
All service welding company. We offer anything from general repair work to specialty buildings. No job to small. We have A.W.S. Certificatons on file as well.
All service welding company. We offer anything from general repair work to specialty buildings. No job to small. We have A.W.S. Certificatons on file as well.
Southern Way Enterprises is an Excavation and Concrete Company dipping our hands into most construction genre. With a combined experience of over 50 years there is no job to large or small we will accomplish all. currently we have 5 employees working for us but numerous sub-contractors ready for work. Usually we require 35% of fees at start of project 35% half way through progression and 30% when finalized.
Southern Way Enterprises is an Excavation and Concrete Company dipping our hands into most construction genre. With a combined experience of over 50 years there is no job to large or small we will accomplish all. currently we have 5 employees working for us but numerous sub-contractors ready for work. Usually we require 35% of fees at start of project 35% half way through progression and 30% when finalized.
JAM is a locally owned and operated business serving the surrounding communities. JAM is an active member of the Wichita Falls community, we support the local high schools, as well as charities. We look forward to serving and giving back to our community in as many ways as possible. We offer seasonal promotions and work with many area sub-contractors to make sure all your needs are met with in our one-stop shop. We have a beautiful show room that helps you envision any and all your remodel needs. Be sure to come by our Wichita Falls location and look at all the endless possibilities!
JAM is a locally owned and operated business serving the surrounding communities. JAM is an active member of the Wichita Falls community, we support the local high schools, as well as charities. We look forward to serving and giving back to our community in as many ways as possible. We offer seasonal promotions and work with many area sub-contractors to make sure all your needs are met with in our one-stop shop. We have a beautiful show room that helps you envision any and all your remodel needs. Be sure to come by our Wichita Falls location and look at all the endless possibilities!
We are a service company specializing in high end gas grill and outdoor kitchen equipment servicing. We specialize in custom fire features/pits, design and installation.
"I contracted Andy Kalnasy from Q4U Outdoorz grill to repair the ignition system in my DCS 30" gas grill. Andy charges $60 cash for the grill evaluation and then will send you a summary of the parts and labor needed for the repair. I received his summary of the parts and labor cost ($489.70) to repair the ignition system for a grand total of $547.70. I approved the repair cost and Andy returned a week or so later and completed the repair. I told Andy I wanted to put the $489.70 on a credit card (which they accept per their website) but he asked me if I could write a check instead, which I did. The second time I tried to light my grill there was NO spark coming from the ignition module. I replaced the battery to make sure that wasn't the problem, which it wasn't. So, I emailed Andy and asked him to return to my home to look at the grill, to which he said NO. He indicated he did not replace the ignition button or module and that was probably the problem. He wanted another $150/per hr. to look at my grill again. I asked him if he guaranteed his work to which he indicated "only the parts I replaced". I tried to stop payment of the check but of course he cashed it the very same day, knowing I could have contested a charge on my credit card. So, be aware of this guy and his business practices. Charging someone almost $600 to fix the ignition system and not replacing the ignition button or module is unacceptable! I would strongly recommend NOT using this guy or company."
Richard M on July 2021
We are a service company specializing in high end gas grill and outdoor kitchen equipment servicing. We specialize in custom fire features/pits, design and installation.
"I contracted Andy Kalnasy from Q4U Outdoorz grill to repair the ignition system in my DCS 30" gas grill. Andy charges $60 cash for the grill evaluation and then will send you a summary of the parts and labor needed for the repair. I received his summary of the parts and labor cost ($489.70) to repair the ignition system for a grand total of $547.70. I approved the repair cost and Andy returned a week or so later and completed the repair. I told Andy I wanted to put the $489.70 on a credit card (which they accept per their website) but he asked me if I could write a check instead, which I did. The second time I tried to light my grill there was NO spark coming from the ignition module. I replaced the battery to make sure that wasn't the problem, which it wasn't. So, I emailed Andy and asked him to return to my home to look at the grill, to which he said NO. He indicated he did not replace the ignition button or module and that was probably the problem. He wanted another $150/per hr. to look at my grill again. I asked him if he guaranteed his work to which he indicated "only the parts I replaced". I tried to stop payment of the check but of course he cashed it the very same day, knowing I could have contested a charge on my credit card. So, be aware of this guy and his business practices. Charging someone almost $600 to fix the ignition system and not replacing the ignition button or module is unacceptable! I would strongly recommend NOT using this guy or company."
At Drop Tine Fabrication we preform precision CNC plasma metal cutting and custom metal fabrication. We cover many fields in our cutting and fabrication such as industrial steel / parts, oil field, automotive=off road and race applications, metal art, home and garden decor, signs, rustic lighting, and much much more. Time is money in the industrial field, with precision CNC plasma cutting we can cut faster and cleaner than conventional oxy cutting with speeds up to 250 inches a minute depending on the thickness and type of metal. We are able to cut up to 3/4" steel plate with virtually No Design Limits. On all metals cut there is little to no clean up saving you money through less preperation of cut pieces for welding and fabrication and a much cleaner look. We utilize water bed tables on our machines to eliminate warping of material when cutting in tight tolerances. Our CNC (computer numerical controlled) cutting table can handle plate up to 5' by 12'. Plasma cutting uses special torches, power supplies and nozzles to control a stream of ionized gas. The stream of gas (oxygen) can cut through carbon steels, aluminum and stainless steel with great precision. High definition plasma cutting improves edge quality on thinner materials (3/8" and less) by increasing the energy density of the ionized gas stream. We can design virtually any image you wish utilizing our multipile autocad programs we have in service. Our custom designs and fabrications are one of a kind hand crafted pieces for each of our customers needs. Weather you design it or we design it the final product is a clean cut well built piece designed especialy just for you. THE POSSIBILITIES ARE ENDLESS....
At Drop Tine Fabrication we preform precision CNC plasma metal cutting and custom metal fabrication. We cover many fields in our cutting and fabrication such as industrial steel / parts, oil field, automotive=off road and race applications, metal art, home and garden decor, signs, rustic lighting, and much much more. Time is money in the industrial field, with precision CNC plasma cutting we can cut faster and cleaner than conventional oxy cutting with speeds up to 250 inches a minute depending on the thickness and type of metal. We are able to cut up to 3/4" steel plate with virtually No Design Limits. On all metals cut there is little to no clean up saving you money through less preperation of cut pieces for welding and fabrication and a much cleaner look. We utilize water bed tables on our machines to eliminate warping of material when cutting in tight tolerances. Our CNC (computer numerical controlled) cutting table can handle plate up to 5' by 12'. Plasma cutting uses special torches, power supplies and nozzles to control a stream of ionized gas. The stream of gas (oxygen) can cut through carbon steels, aluminum and stainless steel with great precision. High definition plasma cutting improves edge quality on thinner materials (3/8" and less) by increasing the energy density of the ionized gas stream. We can design virtually any image you wish utilizing our multipile autocad programs we have in service. Our custom designs and fabrications are one of a kind hand crafted pieces for each of our customers needs. Weather you design it or we design it the final product is a clean cut well built piece designed especialy just for you. THE POSSIBILITIES ARE ENDLESS....
Showing 1-10 of 21
Wrought Iron questions, answered by experts
Pictures of the area where you want your handrail installed should help get an accurate estimate. You should also let your professional know how accessible the installation location is, and whether or not there is a pre-existing railing to remove. Also, before contacting the pro, take some time to decide what type of wrought iron you are leaning toward.
Finally, have the overall length of your railing at the ready, so you can discuss prefabricated options versus custom-made options.
Rust, bent or broken bars, loose posts, and weakened welds are common problems that require repair to maintain security and appearance.
Most homeowners who install a wrought iron fence do so because it provides security. The material is sturdy and deters intruders from entering your property. They're also built to last and won't rust if you purchase a galvanized iron fence. So, you don't have to worry about replacing fencing every few years like you might with wood or other less expensive materials. Most homeowners also adore the look of wrought iron fencing, which adds a timeless look to just about any style home.
The distance between fence posts depends on the type of fence you’re installing. Wood and metal fence posts should be between 5 feet and 8 feet apart. Chain-link fence posts can be closer together at 4 feet apart, or the spacing can be up to 10 feet apart. Vinyl fence posts can be between 6 feet and 8 feet apart, and wire fence posts can be up to 12 feet apart.
The cost to install a fence averages between $1,800 and $4,500, ranging from as low as $450 to as much as $43,000 for a five-acre yard. Cost factors include the size of the fence, type of fence material, height, site prep, and additional features like gates. Keep in mind that custom fabrication of fences and gates can also increase the cost.
The Menard, TX homeowners’ guide to wrought iron services
From average costs to expert advice, get all the answers you need to get your job done.
