Get matched with top carpenters in Jefferson, TX

"It's very hard to get a roofing company to do a smaller building. We have a 16/40 ft building, and need decking work and shingles, it was leaking. Jose was very polite and answered all my questions regarding what needed to be done. He even answered questions on our existing Metal Roof, and he eased my worries on it. They did a fantastic job on the Portable Building, and did it in a day, Made sure everything was cleaned afterwards, I would highly recommend anyone to J&R Roofing."

"They were very thorough with the job. Once they started on the porch rebuild, they told us about other problems caused by rain damage. In which they repaired all of it. We are very happy with the outcome. The porch looks amazing and very sturdy! They did not skimp on screws! It will be there for a while!"

"Found Sentri on Angi. Jeanette and Violet were very pleasant and efficient in getting a contractor to me in the time frame needed. The contractor was excellent and the roof looks great! I would definitely work with them again if I had additional projects."

Concho's Builders is committed to excellence in every aspect of our business. We uphold a standard of integrity bound by fairness, honesty and personal responsibility. Our distinction is the quality of service we bring to our customers. Accurate knowledge of our trade combined with ability is what makes us true professionals. Above all, we are watchful of our customer's interests, and make their concerns the basis of our business

"Always on time, dependable, quality work"

"Ryan and his helper came out and installed some sheetrock and tape and bed. They put in a long day and did excellent work. Highly recommended"

"Efficient and hard worker. Did quality work and made sure to clean up the work area up. Would hire again!!"

"They did a great job, especially since they installed the floor the two days just before Christmas."

"

We had 3 bids all through Angie's List, one of the companies Granite Outlet II that  we had used before. The other two bids were from Solid Stone Fab. and KAT Fab

Most of the bids were similar, except all of the companies provided different prices for removal, sink cutout, plumbing for rehook-up of sink, and rehooking up stove top.

Granite Outlet II had a plumber in-house. Solid Stone had a recommendation for a plumber and KAT didn't provide a recommendation.

We kept our backslash and KAT was the only company that had an issue with cutting it down if needed. And it was cut to allow for the quartz.

We chose Solid Stone Fabricators because we trusted Claudia to do a good job for us. She was very attuned to our needs and anytime we asked her a question if she didn't already know it she got right back with us. She took good notes and made sure we were getting exactly what we wanted. She was very professional and a pleasure to work with. We went to see the where the countertops were fabricated at Solid Stone and we also went to Cambria Quartz in Carrollton and looked at the Quartz we wanted and received large samples there.

They came out and measured and showed up on time, then we scheduled for the install.

The installers showed up at their scheduled time and finished in less then 5 hours. The next morning the plumber came and hooked the sink and stove back up.

Claudia came out a few days later and bought us our extra quartz. its VERY heavy but we wanted to keep it and they also made us a cutting board.

I LOVE MY COUNTERTOPS AND NEW GRANITE SINK!

"

"Hello, My name is Phil Carr-Jones, I am reviewing my experience of working with and building my own kitchen, using cabinets and doors from Arkansas Wood Door. While I am an Episcopal Priest, it turns out I get to do a lot of things they don't teach you in seminary. Over the years, I have had to get fairly skilled in all the trades, including, no surprise, carpentry. But I am by no means an expert. For instance, I employed a retired carpenter to help out with the crown molding and other trim. Apart from that though, this is all my and my wife's work. So let me state up front, Arkansas Wood Doors is the go to place for the DIY’er who is thinking of remodeling their own kitchen. Here's why: I searched the web for months, literally doing comparisons and research on flat pack rta cabinets. I went to the big box store for a design and pricing in their three lines of cabinets, and I went in for a consult with a small custom shop in my area. Here's what I found. 99 outof 100 rta cabinet companies have their product made in china which means the standards for formaldehyde are going to be as fishy as they smell, plus you can only get cabinets in fixed sizes so if you looking to eeck out every last inch of space you're going to lose a lot and you'll be using a lot of filler strips wasting what could have been useful storage. If you want to go custom, then you only have less than a handful of online options, companies that will make to order in any dimension. For instance, I only wanted an 8 inches deep spice cabinet to allow for greater working room over the counter. My wife and I are pretty serious about cooking from pastries to mains and sides. We want a very serious kitchen. Plus, I'll tall so I needed the room. In any case, if you want something custom your choices online are limited. The big box stores don't really do custom and are just as limited in their options as are the online rta places. Most online rtas offer far cheaply made boxes with construction methods less sturdy. I have found that if I buy cheap, I shouldnt expect my kitchen to hold up past a few years. The finish will fade. The drawers will warp. The joints will open up. The big box stores basically offer the same thing, too. When I go to a big box store to buy something, I do it knowing I probably willl get a year out of it, whether that’s a lawn chair of a power tool. I mean when was the last time you regretting spending too much money on a better grade of power tool? So if you want quality, a better and safer grade building material and much wider choices in sizing then your basically down to three or four options. I went with Arkansas Wood Door and am completely pleased and impressed by the experience. Now I could have spent twice what I did and gone to a small custom shop and gotten the same thing, but I am in to saving money and frankly I enjoy the challenge. AWD worked with me directly. Working up the order and getting the plan for each box just right. If you have never designed and built a kitchen before, there are plenty of tips and guidance on the web and I recommend you heartily research all of the aspects and complications involved. I hit a couple of unexpected bumps. But more about that below. So do your research. For instance you can save a lot of money by building the plinths yourself and only order squared off boxes without the toe kick. By making the platform on which you place the lower cabinets first, you can get that plumb and level, so throwing up the boxes is a breeze. And again, the cabinets are also less expense, a complete all around win. AWD uses an easy system for matching up box parts so assembly was easy. No special tools required. Given the many parts and I used a mix of frameless and face framed cabinets, there was a moment or two when in amongst all the materials I got nervous about having everything I needed, but low and behold, all was right there in the end. I also recommend the concept from French cooking "mis en place" that is have all your ingredients in place and all your tools where you need them before starting out. Also, it was a lot easier to work with my wife than doing it alone, but I did a few by myself and so if that is your only option than you should have no problem. I've assembled a lot of cheaper Swedish flat packed furniture in my day, and the quality and sturdiness of AWD leaves no doubt about how long these will last. Just rock solid. Great thing about AWD is the cost to quality ratio. Cant beat it. Which also means if you make a mistake the replacement is so reasonable it becomes not big deal. I mis-measured one box and so I needed to order the right size. Worked out fine, but that was because AWD had an incredibly fast turn around. The other few reliable companies are several weeks to months. And these other places are crazy expensive. And in truth, the other companies are a complete rip off on trim and accessories. AWD pricing was so amenable that my mistakes cost me so little in comparison with what I was saving. So there's a built in confidence for the first timer. Also AWD made one mistake on the placement of a hinge in two doors. They immediately and without question remade them and sent them out in under ten days. You just can't get that service anywhere in the custom cabinet world. It was so affordable I upgraded on one side to black walnut. Trying doing that at the other quality shops. The quality of the roll out drawers and top drawer boxes is superb and the hinges and under-mount sliders are top grade excellent. The hardware was the easiest part frankly. Their system, for lining up the hardware is just so easy. Drill driver is all you need as the placement is already leveled for you. SO: high end quality custom built cabinets, superior custom support, fastest turnaround in the marketplace, most affordable pricing out there, excellent hardware, and oh yeah, I almost forget, color choices. They offer complete line of lacquer - just pick a SW color and they'll match it. SO completely and truly custom for a fraction of cost without sacrificing any quality. The Rev. Philip Carr-Jones"