"STL Woodworking does AMAZING work. Greg is great to work with and always delivers an amazing product. I would absolutely recommend using STL Woodworking!"
"Trevor has been an amazing contractor who has helped us through the process of installing a large interior door for an office. He has helped ensure the space was properly prepared for installation of the door. The other contractors who have assisted Trevor have also exceeded my expectations. They have been extremely detail oriented and have done everything to ensure the best outcome. I would definitely work with Trevor for any future projects."
"We have hired Cummings Home for multiple projects. Built our new deck absolutely gorgeous. They have hung Electrical fixtures, laid flooring and painting too. They are our go to company for all our repairs and maintenance needs. Excellent roofing and repair company! You won’t be disappointed. They even did a Commercial wash down and maintenance on the inside of a huge bakery. Great Company!"
"Overall Ethan and his staff were very professional and efficient.
On our initial meeting Ethan listened to us and developed a work plan that would meet our needs. He was prompt in submitting a reasonable estimate and answered all our questions. We set a date to begin. The weather caused a delay, but Ethan was quick to notify us of the delay. Another start date was set and the work was done. We had four projects (repair ceiling in the garage, repair the main shower grout, replace floor trim, and design/build a sunroom step). We are very pleased with the final results of the work. The staff completed their tasks in a timely manner and were really nice guys. I would highly recommend Ethan Putnam and his staff at All Around Solutions LLC."
"They were VERY responsive. I had an unusual project that I decided to abort. My decision had NOTHING to do with the contractor. Just a simple change in plans. I plan to keep their info in my contact list for further consideration one day."
"Andrey was very professional and responsive to my questions about a porch project that I was considering. Key detail for me....he was where he said he would be, when he said he would be there. It was near immediate service and a reasonable quote as well.
Although I didn't use TriCore this time, I wouldn't hesitate to call them for my next project."
"Found Sentri on Angi. Jeanette and Violet were very pleasant and efficient in getting a contractor to me in the time frame needed. The contractor was excellent and the roof looks great! I would definitely work with them again if I had additional projects."
Hi I’m Thomas, I am about to graduate from the university of Tennessee with a degree in mechanical engineering. I have been using tools all my life and I have lots of experience in all sorts of areas. I take my time and do the best job I can no matter what it is. I take pride in my work and don’t cut corners. I enjoy meeting new people and building connections.
On average, the cost to hire a carpenter ranges from about $75 to $100 per hour, depending on the type of carpentry, location, size of the job, and skill level of the carpenter. Get quotes from at least three carpenters in your area to determine the best price for your specific project.
While you can perform many routine home maintenance jobs yourself, it’s often a good idea to bring pros in for certain tasks. HVAC maintenance, fireplace and chimney inspections, foundation repairs, and roof inspections and repairs should be handled by professionals who know what to look for and can safely perform repairs. You may also find it helpful to hire a local house cleaning service to help with deep cleaning.
Joists do distribute their load to beams, but they don’t sit on top of the beams. Instead, home builders nail or screw the joists directly to the beams such that the end of the joist butts up against the edge of the beam. Beams can sit on other beams for support, but you’ll never see a joist sitting on top of a beam or another joist.
If you don’t have a coping saw, you can use an angle grinder to cope crown molding, but it takes a little more precision. Place your molding down on your workbench, angle the grinder at a 45-degree angle toward the molding, and back cut the wood. You’ll need to carefully angle your grinder to accommodate the curves in the wood, and aim to remove around 1 inch from the profile of the molding.
Many contractors prefer checks because they’re easy to track and have no associated fees. However, many also accept credit cards (though they might add a fee to cover their processing costs).
The Ocoee, TN homeowners’ guide to woodworking services
From average costs to expert advice, get all the answers you need to get your job done.
Discover the built in bookcase cost for 2026. Learn about price ranges, installation factors, and ways to save on your custom built in bookcase project.
Knowing how to build a cabinet base on your own will make it easy to add storage to just about any space, from a stylish kitchen island to a new bathroom vanity.
Sandpaper has a plethora of uses, which is why there are so many options. Learn about the various sandpaper grits to choose the right grit for the project.