Get matched with top cabinet makers in Dillon, SC

The 1/3 rule is a design guideline used by interior designers and cabinet installers to select appropriately sized pulls for cabinets and drawers. The rule suggests that for a balanced and cohesive look, a cabinet pull should be approximately one-third the height of the cabinet door or one-third the width of the drawer face. This guideline helps create a symmetrical appearance because the human eye tends to follow the length of the pull across the cabinet face.

While the 1/3 rule is a helpful starting point, it is not the only option. If a measurement falls between available pull sizes, it's generally best to size up. For an ultra-contemporary aesthetic, you can also opt for full-width pulls that span the entire drawer.

If your cabinets don’t reach the ceiling, you can extend them higher, adding visual interest, privacy, and storage space to your kitchen. Depending on the height of your ceiling, you may want to extend the structure of the cabinets and install longer doors to make each individual cabinet taller, or you could add additional cabinets above the existing ones. Either option is cheaper and easier than installing entirely new cabinets.

It is generally more cost-effective to purchase stock or semi-custom cabinets than to have them custom-built. The best option depends on your budget and customization needs.

Here is a breakdown of the average costs per linear foot:

• Custom Cabinets: $500 to $1,200. The final price is influenced by factors like materials, size, and design complexity. For example, a basic slab cabinet door might cost $60 to $70 for materials, while a more intricate mullioned glass inset panel door can range from $100 to $200 per door.

• Semi-Custom Cabinets: $150 to $700.

• Stock Cabinets: $100 to $400. These are pre-built and the most affordable option, but they offer limited customization and may not be suitable for rooms with unusual shapes or high ceilings.

Some municipalities require permits for wall-mounted furniture installations, particularly when structural modifications are necessary. Always make sure to check local building codes before starting your Murphy bed installation project. Your Murphy bed installer will be familiar with local codes and handle the permitting process, ensuring your project complies with all relevant regulations.