Top-rated structural engineers.

Get matched with top structural engineers in Hollidaysburg, PA

There are 0 highly-rated local structural engineers.

Need a pro for your structural engineering project in Hollidaysburg, PA?

Select your specific project to find the pro for you.

Find Structural engineers in Hollidaysburg

Avatar for Groundworks

Groundworks

3819 N Susquehanna Trl
4.39(
57
)
Approved Pro

Groundworks

3819 N Susquehanna Trl
4.39(
57
)
Approved Pro
Customers say: Super punctual
38 local quotes requested
50 years of experience

Groundworks, formerly Baker's Waterproofing, has specialized in helping homeowners with their foundation repair, waterproofing, and concrete needs since 2009. Our top priority is providing high-quality home repair solutions and personalized service across central Pennsylvania. With fully trained technicians, industry-leading products, and nationally backed warranties, Groundworks is here to restore your basement, foundation, or concrete. PA158514 (PA)

"The job went extremely well. Aaron Lenker and Corbin Gillichbauer performed the service and were professional and polite. I’m completely satisfied. Well done."

Paul S on July 2025

Groundworks, formerly Baker's Waterproofing, has specialized in helping homeowners with their foundation repair, waterproofing, and concrete needs since 2009. Our top priority is providing high-quality home repair solutions and personalized service across central Pennsylvania. With fully trained technicians, industry-leading products, and nationally backed warranties, Groundworks is here to restore your basement, foundation, or concrete. PA158514 (PA)

"The job went extremely well. Aaron Lenker and Corbin Gillichbauer performed the service and were professional and polite. I’m completely satisfied. Well done."

Paul S on July 2025


Avatar for NEC Solutions, LLC

NEC Solutions, LLC

504 Juneberry Court
5.00(
10
)
Approved Pro

NEC Solutions, LLC

504 Juneberry Court
5.00(
10
)
Approved Pro
Customers say: Quick response
16 local quotes requested
10 years of experience

NEC Solutions LLC is a licensed Pennsylvania Civil & Structural Engineering firm with over 5 years of experience. (Direct :610-888-9818) We offer complete services for residential and commercial projects, from design to permitting and construction. Civil Services: Soil testing for septic systems, site surveys, contour mapping, stormwater design, and construction layout. Structural Services: New construction design, additions, structural drawings for permits and construction, foundation design/calculations, foundation and deck inspections, evaluations for renovations, solar panel permits with load calculations. Drafting Services: CAD drafting, 3D modeling, quantity takeoffs, permit packages. Permit Services: City of Philadelphia L&I permits, PennDOT HOP permits, full township coordination. We ensure accuracy, code compliance, and professional service on every project. Website: www.necsolutions.us Email: [email protected] Mobile: 610-888-9818

"NEC did good work, turn around time was fast, good experience all around. "

Steve C on June 2025

NEC Solutions LLC is a licensed Pennsylvania Civil & Structural Engineering firm with over 5 years of experience. (Direct :610-888-9818) We offer complete services for residential and commercial projects, from design to permitting and construction. Civil Services: Soil testing for septic systems, site surveys, contour mapping, stormwater design, and construction layout. Structural Services: New construction design, additions, structural drawings for permits and construction, foundation design/calculations, foundation and deck inspections, evaluations for renovations, solar panel permits with load calculations. Drafting Services: CAD drafting, 3D modeling, quantity takeoffs, permit packages. Permit Services: City of Philadelphia L&I permits, PennDOT HOP permits, full township coordination. We ensure accuracy, code compliance, and professional service on every project. Website: www.necsolutions.us Email: [email protected] Mobile: 610-888-9818

"NEC did good work, turn around time was fast, good experience all around. "

Steve C on June 2025


Carl J. Massini, P.E.

Main Street
No reviews yet

Carl J. Massini, P.E.

Main Street
No reviews yet
36 years of experience

Residential structural engineering inspections to assess structure condition and damage concerns. Develop and/or review scopes of work for repair. Professional engineer with 32 years experience. Owner operated which allows for reasonable rates. Extensive mine subsidence damage investigation experience.

Residential structural engineering inspections to assess structure condition and damage concerns. Develop and/or review scopes of work for repair. Professional engineer with 32 years experience. Owner operated which allows for reasonable rates. Extensive mine subsidence damage investigation experience.


Boyle Engineering, LLC

130 Farm Ln
5.00(
6
)

Boyle Engineering, LLC

130 Farm Ln
5.00(
6
)
Customers say: Quick response
Recommended by 100% of Angi customers
Recommended by 100% of HomeAdvisor customers

Boyle Engineering, LLC is a family owned and operated civil engineering firm based in Central Pennsylvania. We offer Structural Engineering (bridges, small buildings, decks, repair details, etc.), Geotechnical Engineering (retaining walls, foundations, steep slopes, etc.), Permitting, and Construction Engineering (demolition plans, earth shoring, structure shoring, etc.). Our staff has a wide variety of project experience from large bridges to residential beam repair. Bottom line, if you need a Licensed Professional Engineer for new construction, addition, remodel or concerns with an existing home, business or retaining wall, contact us.

"The service went very well. They were on time, very polite and they were very professional."

Ed C on August 2021

Boyle Engineering, LLC is a family owned and operated civil engineering firm based in Central Pennsylvania. We offer Structural Engineering (bridges, small buildings, decks, repair details, etc.), Geotechnical Engineering (retaining walls, foundations, steep slopes, etc.), Permitting, and Construction Engineering (demolition plans, earth shoring, structure shoring, etc.). Our staff has a wide variety of project experience from large bridges to residential beam repair. Bottom line, if you need a Licensed Professional Engineer for new construction, addition, remodel or concerns with an existing home, business or retaining wall, contact us.

"The service went very well. They were on time, very polite and they were very professional."

Ed C on August 2021



Thermal Comfort Plus

107 Farmland Dr
5.00(
5
)

Thermal Comfort Plus

107 Farmland Dr
5.00(
5
)
Customers say: Quick response
Recommended by 100% of Angi customers
Recommended by 100% of HomeAdvisor customers

We are family owned company. We specialize in blow-on insulation company, and are certified in weatherization through Penn Tech. We provide fast and friendly service. Let us help you save on heating and cooling cost.

"It was wonderful. They just came in and did their job. They cleaned up everything when they left. They're insulation got us a big discount. They were there as soon as we needed the job."

Donna B on September 2019

We are family owned company. We specialize in blow-on insulation company, and are certified in weatherization through Penn Tech. We provide fast and friendly service. Let us help you save on heating and cooling cost.

"It was wonderful. They just came in and did their job. They cleaned up everything when they left. They're insulation got us a big discount. They were there as soon as we needed the job."

Donna B on September 2019


Effective Technical Applications, Inc.

10 Wayne Avenue
No reviews yet

Effective Technical Applications, Inc.

10 Wayne Avenue
No reviews yet
27 years of experience

“ANGIE’S LIST DISCOUNT” – My Angie’s List Clients are given a ten percent (10%) discount on my Fee since Angie’s List does not charge businesses to list their services; therefore, my marketing cost is zero ($0.00) for my Angie’s List Clients. “FINANCING” – Clients are requested to make payment by check with sufficient funds on deposit to cover the check. Should the client be unable to make timely payment then their project is placed on hold until payment is received. The only penalty my Client incurs is loss of schedule, which they control with timely payment. No late fee ($0.00), no interest ($0.00), and no returned check fee ($0.00), is charged. “DESIGN/BUILD SERVICES FINANCING” – The cost of my services (Planning, Design, Engineering, Plans Drafting – CAD, Construction Management, & Inspection) is built into the “Construction Cost”; therefore, my services can be financed over the life of my Client’s mortgage. “EMPLOYEES” – Jonathan A. Snyder is a self-employed Professional Engineer, company of 1 person, who is networked with other qualified designers, engineers, and construction professionals. “PLANS PAYMENT” – Construction Plans are provided on either a “Fixed Fee” or “Not to Exceed Time & Expense” basis, payable in three (3) installments; 1/3 due at “Contract Signing”, 1/3 due at “Planning / Design Review”, 1/3 (or balance) due at “Delivery of Completed Plans”. “DESIGN/BUILD” – “SUB-CONTRACTING” and “PAYMENT”: LABOR – Construction Labor is bid by a minimum of three (3) Sub-contractors; all Bids are reviewed and presented to the Building Owner with recommendation on the “Lowest Qualifying Bid”; the Bid is awarded (Sub-contracted) to the contractor preferred by the Building Owner. MATERIALS – Quotes for all Construction Materials are obtained from a minimum of three (3) suppliers; all Quotes are reviewed and presented to the Building Owner with recommendation on best “Supplier”; Material Purchase Orders are awarded to the supplier preferred by the Building Owner. ENGINEER’S FEE – Engineer’s Fee includes the cost of Planning, Design, Engineering, Plans Drafting (CAD), Construction Management, & Inspection and is provided on a fixed percentage basis of the “Actual Labor & Materials Cost” (“AL&MC”); 1/3 due at contract signing based on the “Estimated Labor & Materials Cost” (“EL&MC”) for the project; the remaining balance is paid at each “Construction Draw” and based on the “AL&MC”. The Engineer’s Fee limit is set at time of contract signing based on the “EL&MC”. The Engineer’s Fee is reduced if the “AL&MC” is less than “EL&MC”; the Engineer’s Fee is not increased if the “AL&MC” is greater than “EL&MC” used at Contract Signing. “CHANGE ORDERS”: MUNICIPAL AUTHORITY OPINION: All “Plans Changes” mandated by the Municipality’s Zoning Officer, Building Code Official, and/or Engineer that are not based on a “Zoning Ordinance, Building Code Ordinance, Land Development Ordinance, Storm Water Management Ordinance, and/or an International Code Council Code (ICC I-Codes) References and are based on the “Reviewing Authority’s Opinion / Preferred Method” are provided on an “Engineering Change Order Basis”. MUNICIPAL AUTHORITY CITED ORDINANCE or STATUTE REFERENCE: All “Plans Changes” mandated by the Municipality’s Zoning Officer, Building Code Official, and/or Engineer that are based on a “Cited Zoning Ordinance, Building Code Ordinance, Land Development Ordinance, Storm Water Management Ordinance, and/or International Code Council Codes (ICC I-Codes) References are provided at no charge to my Client. NO SCOPE CHANGE – All “Plan Changes” within the Contract Scope of Work (i.e. Change a room layout) requested prior to “Final Plans Issue” are provide at no additional charge ($0.00). SCOPE CHANGE – All “Plan Changes” not within the Contract S

“ANGIE’S LIST DISCOUNT” – My Angie’s List Clients are given a ten percent (10%) discount on my Fee since Angie’s List does not charge businesses to list their services; therefore, my marketing cost is zero ($0.00) for my Angie’s List Clients. “FINANCING” – Clients are requested to make payment by check with sufficient funds on deposit to cover the check. Should the client be unable to make timely payment then their project is placed on hold until payment is received. The only penalty my Client incurs is loss of schedule, which they control with timely payment. No late fee ($0.00), no interest ($0.00), and no returned check fee ($0.00), is charged. “DESIGN/BUILD SERVICES FINANCING” – The cost of my services (Planning, Design, Engineering, Plans Drafting – CAD, Construction Management, & Inspection) is built into the “Construction Cost”; therefore, my services can be financed over the life of my Client’s mortgage. “EMPLOYEES” – Jonathan A. Snyder is a self-employed Professional Engineer, company of 1 person, who is networked with other qualified designers, engineers, and construction professionals. “PLANS PAYMENT” – Construction Plans are provided on either a “Fixed Fee” or “Not to Exceed Time & Expense” basis, payable in three (3) installments; 1/3 due at “Contract Signing”, 1/3 due at “Planning / Design Review”, 1/3 (or balance) due at “Delivery of Completed Plans”. “DESIGN/BUILD” – “SUB-CONTRACTING” and “PAYMENT”: LABOR – Construction Labor is bid by a minimum of three (3) Sub-contractors; all Bids are reviewed and presented to the Building Owner with recommendation on the “Lowest Qualifying Bid”; the Bid is awarded (Sub-contracted) to the contractor preferred by the Building Owner. MATERIALS – Quotes for all Construction Materials are obtained from a minimum of three (3) suppliers; all Quotes are reviewed and presented to the Building Owner with recommendation on best “Supplier”; Material Purchase Orders are awarded to the supplier preferred by the Building Owner. ENGINEER’S FEE – Engineer’s Fee includes the cost of Planning, Design, Engineering, Plans Drafting (CAD), Construction Management, & Inspection and is provided on a fixed percentage basis of the “Actual Labor & Materials Cost” (“AL&MC”); 1/3 due at contract signing based on the “Estimated Labor & Materials Cost” (“EL&MC”) for the project; the remaining balance is paid at each “Construction Draw” and based on the “AL&MC”. The Engineer’s Fee limit is set at time of contract signing based on the “EL&MC”. The Engineer’s Fee is reduced if the “AL&MC” is less than “EL&MC”; the Engineer’s Fee is not increased if the “AL&MC” is greater than “EL&MC” used at Contract Signing. “CHANGE ORDERS”: MUNICIPAL AUTHORITY OPINION: All “Plans Changes” mandated by the Municipality’s Zoning Officer, Building Code Official, and/or Engineer that are not based on a “Zoning Ordinance, Building Code Ordinance, Land Development Ordinance, Storm Water Management Ordinance, and/or an International Code Council Code (ICC I-Codes) References and are based on the “Reviewing Authority’s Opinion / Preferred Method” are provided on an “Engineering Change Order Basis”. MUNICIPAL AUTHORITY CITED ORDINANCE or STATUTE REFERENCE: All “Plans Changes” mandated by the Municipality’s Zoning Officer, Building Code Official, and/or Engineer that are based on a “Cited Zoning Ordinance, Building Code Ordinance, Land Development Ordinance, Storm Water Management Ordinance, and/or International Code Council Codes (ICC I-Codes) References are provided at no charge to my Client. NO SCOPE CHANGE – All “Plan Changes” within the Contract Scope of Work (i.e. Change a room layout) requested prior to “Final Plans Issue” are provide at no additional charge ($0.00). SCOPE CHANGE – All “Plan Changes” not within the Contract S


RICK STEELE SURVEYING

11547 RAYSTOWN RD.
5.00(
1
)

RICK STEELE SURVEYING

11547 RAYSTOWN RD.
5.00(
1
)
Customers say: Quick response
Recommended by 100% of Angi customers
Recommended by 100% of HomeAdvisor customers

SMALL LAND SURVEYING BUSINESS DOING PROPERTY SURVEYING, SUBDIVISION PLANNING, FLOOD ELEVATION CERTIFICATES, SEPTIC SYSTEM DESIGNS AND CONSTRUCTION SURVEYING

SMALL LAND SURVEYING BUSINESS DOING PROPERTY SURVEYING, SUBDIVISION PLANNING, FLOOD ELEVATION CERTIFICATES, SEPTIC SYSTEM DESIGNS AND CONSTRUCTION SURVEYING


kieffer construction

246 Hudsondale St
1.00(
1
)

kieffer construction

246 Hudsondale St
1.00(
1
)
36 years of experience

In business twenty five plus years,we offer very fair prices in todays economy,discounts offered for,senior citizens,military,and return clients.All work done in a timely manner.Satisfaction guaranteed.

In business twenty five plus years,we offer very fair prices in todays economy,discounts offered for,senior citizens,military,and return clients.All work done in a timely manner.Satisfaction guaranteed.


Metal Supermarkets

7120 Golden Ring Road
No reviews yet

Metal Supermarkets

7120 Golden Ring Road
No reviews yet
14 years of experience

Metal Supermarkets is the world’s largest supplier of small quantity metals and offers a number of beneficial features, including:  No minimum order  Over 8,000 metal products, shapes and grades  Unsurpassed Service!  Cut to size  Fast delivery or local pickup I have also attached a line card indicating our metal products and services. Not sure what you need? Our friendly, knowledgeable associates are ready to help. Call us for more information 410-918-0199.

Metal Supermarkets is the world’s largest supplier of small quantity metals and offers a number of beneficial features, including:  No minimum order  Over 8,000 metal products, shapes and grades  Unsurpassed Service!  Cut to size  Fast delivery or local pickup I have also attached a line card indicating our metal products and services. Not sure what you need? Our friendly, knowledgeable associates are ready to help. Call us for more information 410-918-0199.

Showing 1-10 of 13
Structural Engineering questions, answered by experts

A split-level home is one that has several staggered floors connected by short staircases, while a split floor plan separates the primary bedroom from the rest of the bedrooms. Split floor plans are most often found in single-story homes, while split-level homes are always at least two stories.

Any issue that affects the structural integrity or soundness of a home is considered a structural issue. In addition to foundation cracks, other signs of structural issues include roof leaks, bowing walls, sloping floors, gaps around windows and doors, and more.

Yes, professionals reinforce the foundation with additional supports or piers to prevent future sinking.

Their expertise in identifying potential problems early and implementing durable solutions safeguards your home’s integrity.

You should avoid drilling or cutting into load-bearing beams because removing material will weaken it and increase the risk of structural damage or even collapse. If you do need to drill into a load-bearing beam, speak with a structural engineer first to discuss where it’s safest to drill and the width and depth of the bit that’s safe to use.

By submitting this question, I acknowledge and agree that Angi may publicly display my name, city, state, and question on the website for professionals and others to see.

The Hollidaysburg, PA homeowners’ guide to structural engineering services

From average costs to expert advice, get all the answers you need to get your job done.