Top-rated metal fabricators and restorers.

Get matched with top metal fabricators and restorers in Tahlequah, OK

Q: What is the difference between metal casting and metal fabrication?

• <div><p>Metal casting involves creating a prototype and a mold into which metal is poured and allowed to cool and set up. Pieces are cast in molds, making the reproduction of many identical pieces more efficient for larger quantities. Metal fabrication involves creating pieces and welding them together into a larger project, involving more skilled manual labor than metal casting. Fabrication can be more cost-effective in smaller runs but can become less efficient for producing mass quantities of identical pieces.</p></div>

Q: How do you make stainless steel shine?

• <div><p>To restore an appliance&rsquo;s shine, clean the surfaces using a natural cleaning solution, and then use a mineral oil or olive oil and a soft microfiber rag to polish stainless steel surfaces in the direction of the graining. A little goes a long way, so dip the cloth in a small amount of oil. If you have any excess, continue with a dry part of the microfiber cloth to soak up any remnants.</p></div>

Q: How can you extend the life of brass?

• <div><p>Storing brass properly, cleaning it regularly, avoiding excess handling, and making sure to only use gentle, non-abrasive cleaning materials can all help extend the life of brass. Storing little-used brass items in airtight, water-tight containers will help prevent oxidation and water damage. For more frequently used items, try not to handle them frequently with bare hands, clean them when they begin showing signs of oxidation or tarnish, and avoid harsh, abrasive cleaners or tools.</p></div>

Q: How do various elements influence the cost of assembling a unit?

• <div><p>Costs depend on unit complexity, labor, wall mounting needs, and additional accessories like floating shelves.</p></div>

Q: Can I repair sheet metal myself?

• <div><p>With the right tools, DIY sheet metal repair can be done for small, non-structural issues, but larger repairs usually require the involvement of an experienced technician.</p></div>

Enter your ZIP and get matched with up to 5 pros

Need a pro for your metal fabrication and restoration project in Tahlequah, OK?

Select your specific project to find the pro for you.

Verified Reviews for Metal Fabrication And Restoration pros in Tahlequah, OK

*The Angi rating for Metal Fabrication And Restoration companies in Tahlequah, OK is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Metal Fabrication And Restoration needs.

*The HomeAdvisor rating for Metal Fabrication And Restoration companies in Tahlequah, OK is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Metal Fabrication And Restoration needs.

Last update on November 15, 2025

Reviewed in October 2025
I want to compliment David and his crew for doing an excellent job on my new roof. They fixed all the problems quickly and efficiently. David was very polite and made sure a couple of minor mishaps were corrected right away. I would definitely recommend Roof Restore ? especially David?s crew....
Mckeage Industries
Request a quote
Reviewed in December 2021
We are so happy we hired Rustic Oak Metal Shop! They were the nicest people to work with and the finished product was exactly what we asked for and more!
Rustic Oak Metal Shop
Request a quote
Reviewed in March 2021
A wonderful experience hiring OKC Restoration crew to do a fire damage restoration! He kept me informed Everyday the work was exceptional! Highly recommended thanks again!
OKC Restoration
Request a quote
Reviewed in February 2021
With the current cost of lumber, we could rebuild a metal carport cheaper which was our desire. Titan has an ad on the internet that I left my information with and they returned my call within hours. They procured the necessary permits and built the structure in a very timely manner. We would...
Titan Building Co.
Request a quote
Reviewed in July 2017
He didn't clean the pipe he had removed while he was up in attic. I looked inside of it and there was still lint inside the pipe. I used a water hose to do the final cleaning job my self. The flex pipe tape he used to reinstall it with fell off after a few weeks. I noticed it was not tight. He...
All Day Chimney & Dryer Vent
Request a quote
Reviewed in October 2014
On 6/18/14 at approximately 4 pm, a pipe burst in the attic which caused the ceiling in the kitchen and dining area to collapse. Water ran down the walls into the bedroom and closet below. I immediately called our insurance company to report the damage and was referred to Emergency...
Emergency Response Restoration
Request a quote
Reviewed in November 2013
We called them and they came out to provide us a firm quote (which few in their business will actually do). The sales person was very professional and knew his business. They worked with us on the date and were flexible in that they allowed us to move half one and half the next. They will give...
Daryl Flood Relocation & Logistics
Request a quote
Reviewed in April 2013
Here is a detailed account of my experience with Counter Acts countertops in Marietta, OK Tuesday, February 26th – Picked out granite and put up deposit, which we figured at 50% of the estimated square footage. Total to be amended upon actual measurements in a few days. I was told there had...
Counter Act Countertops
Request a quote
Reviewed in November 2009
They come four times a month. They are better than the rest.
Eye Watch Home Services
Request a quote

Find Metal fabricators and restorers in Tahlequah

Scissortail Welding, LLC

5.00(

)

•Approved Pro

Scissortail Welding, LLC

5.00(

)

•Approved Pro

Customers say: Quick response

Recommended by 100% of Angi customers

4 years of experience

We take great pride in our experience, expertise, quality, and customer service that we provide to meet the consumer's needs. It is our mission to provide excellent cleaning and complete customer satisfaction from start to completion of a project. In order to understand the needs and expectations of our customers, we take great care to work and communicate with every customer in a professional manner. Our reputation is based on service, safety, and quality, regardless of how large or small the job.

"Good quality, friendly and reliable."

Micheal H on February 2022

"Good quality, friendly and reliable."

Micheal H on February 2022

Get matched with top metal fabricators and restorers in Tahlequah, OK

Enter your ZIP and get matched with up to 5 pros

Need a pro for your metal fabrication and restoration project in Tahlequah, OK?

Handyman for Multiple Small Project Service

Metal Stairs and Railings Installation and Replacement

Carpentry Framing Repair

Verified Reviews for Metal Fabrication And Restoration pros in Tahlequah, OK

Find Metal fabricators and restorers in Tahlequah

Scissortail Welding, LLC

Scissortail Welding, LLC

ABP Contracting LLC

ABP Contracting LLC

Cloud Creek Fence

Cloud Creek Fence

Alco

Alco

Faglie Fabrications

Faglie Fabrications

B & H Industrial

B & H Industrial

WhiteHot Powder Coating

WhiteHot Powder Coating

Pyro Fabrications

Pyro Fabrications

Fence Frame and Fab

Fence Frame and Fab

Kevin Leach Welding & Construction

Kevin Leach Welding & Construction

The Tahlequah, OK homeowners’ guide to metal fabrication and restoration services

How Much Does Sheet Metal Fabrication Cost? [2025 Data]

How Much Does a Wrought Iron Railing Cost? [2025 Data]

6 Metal Stairs Questions to Answer Before Installation

Find Metal fabrication and restoration Pros in other cities near youNot finding what you are looking for in Tahlequah? Check surrounding areas for Metal fabricators and restorers.

Which Metal fabrication and restoration task are you tackling?Find Tahlequah Metal fabrication and restoration services on Angi who specialize in any of these tasks