Top-rated structural engineers.

Get matched with top structural engineers in Panama, OK

Enter your zip and get matched with up to 5 pros

Need a pro for your structural engineering project in Panama, OK?

Select your specific project to find the pro for you.

Find Structural engineers in Panama

CDR ENGINEERING

1.00(
1
)

CDR ENGINEERING

1.00(
1
)
33 years of experience

Home and Building Inspections (primarily structural) for purchasers and mortgage companies and insurance companies.

"Gateway mortgage company recommended Roger and CDR inspections to do a structural inspection of one of our rental properties before approving a refinance. He did not give it a pass, and suggested having nine piers installed around the perimeter of the house. After some due diligence, we discovered that Eden’s had already installed piers in 2020, and we communicated this to Roger. He said he would not give the property an OK until the adjustments were made, so we had Edens come out and adjust the piers, as well as add three additional piers to another corner, per Roger’s instructions. After completing all work, both we and Chris Padley from Gateway Mortgage have been emailing and contacting Roger for 6 weeks to do a final inspection so that we can move forward with our refinance, and he is disregarding all of our phone calls and emails. This has been one of the most frustrating experiences we have ever encountered. We are unable to move forward on our very important refinance until he signs off on this structural inspection. Our lender told us, “I am at a complete loss why he won’t respond.” Look elsewhere, Roger is not friendly and he’s not willing to work with customers."

Homeowner on June 2022

Home and Building Inspections (primarily structural) for purchasers and mortgage companies and insurance companies.

"Gateway mortgage company recommended Roger and CDR inspections to do a structural inspection of one of our rental properties before approving a refinance. He did not give it a pass, and suggested having nine piers installed around the perimeter of the house. After some due diligence, we discovered that Eden’s had already installed piers in 2020, and we communicated this to Roger. He said he would not give the property an OK until the adjustments were made, so we had Edens come out and adjust the piers, as well as add three additional piers to another corner, per Roger’s instructions. After completing all work, both we and Chris Padley from Gateway Mortgage have been emailing and contacting Roger for 6 weeks to do a final inspection so that we can move forward with our refinance, and he is disregarding all of our phone calls and emails. This has been one of the most frustrating experiences we have ever encountered. We are unable to move forward on our very important refinance until he signs off on this structural inspection. Our lender told us, “I am at a complete loss why he won’t respond.” Look elsewhere, Roger is not friendly and he’s not willing to work with customers."

Homeowner on June 2022

Structural Engineering questions, answered by experts

First, most contractors will have a structural engineer create a report and plan for your project to ensure it’s safe to cut into the load-bearing wall. The contractor will then excavate around the wall, if necessary, measure the opening—allowing for additional space to fit and level the door, and then cut the doorway out. They will likely install a steel lintel as a header over the door for support. Once the doorway is cut out, they’ll demolish the concrete using sledge hammers and masonry chisels, clean up the surrounding concrete, and seal around the door with masonry mortar. 

Stone, marble, and brick are common building materials of Neoclassical architecture, though you will also find wood flooring and a range of natural stone tiles. Since several home styles fall under Neoclassical architects' umbrella, a range of building materials—including traditional wood framing—will make an appearance.

Yes, unresolved damage can decrease property integrity and market value.

According to the Earthquake Country Alliance—a public and private alliance in California that works to improve earthquake and tsunami readiness—reports that unreinforced masonry, such as stone, bricks, and hollow clay tiles, is more susceptible to earthquake damage. The mortar between bricks isn’t as stable as other building materials and methods.

In framing, studs are placed at 16-inch intervals to coincide with the typical spacing of wall materials such as drywall or plywood. This spacing is called "on-center" and is necessary for maintaining structural stability and efficient use of materials. The 16-inch spacing also helps to distribute the weight evenly across the building's structure. For those looking to cut material costs and improve energy efficiency, 24-inch stud spacing can be employed through a method called "advanced framing". This requires careful planning and adherence to local building codes to ensure structural integrity.

The Panama, OK homeowners’ guide to structural engineering services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

What do you need done? We’ll find top pros.
  • 🌱 "Mow a small front yard"
  • 🛠 "Fix a leaking pipe under the sink"
  • 🏠 "Repair shingles on an asphalt roof"