Get matched with top welders in Miami, OK

Q: How do you cut rectangular ductwork?

• <div><p>Cutting rectangular ductwork requires careful measurements and the right technique. Use a measuring tape and pencil to mark the cutting lines accurately. Tin snips are excellent for straight cuts on smaller ducts. For more extensive or thicker rectangular ducts, a reciprocating saw with a metal-cutting blade is effective. </p><p>Ensure the duct is well-supported and secure while cutting to prevent wobbling and maintain precision. After cutting, use a metal file to smooth any sharp edges, ensuring safety during installation. </p></div>

Q: How do you cut round ductwork?

• <div><p>Cutting round ductwork requires precision and the right tools. A duct cutter, specifically designed for circular ducts, is ideal. First, mark the cutting line on the duct using a measuring tape and pencil. Then, position the duct cutter's blade on the marked line. Apply steady pressure, rotating the cutter around the duct. The sharp blade creates a clean, precise cut. Alternatively, a reciprocating saw with a metal-cutting blade can be used for larger round ducts. Ensure the duct is securely held in place while making the cut to prevent slips and maintain accuracy.</p></div>

Q: What’s the difference between a welder and a metal fabricator?

• <div><p>Welding is the process of using extreme heat&mdash;and, sometimes, pressure&mdash;to attach two pieces of metal. In contrast, metal fabrication is a more involved process that can include welding, sheet metal work, bending, and other forms of metal manipulation. Metal fabrication is a large-scale project that may or may not involve welding, while welding is more often a step in larger fabrication projects.</p></div>

Q: What household tool can cut a metal pipe?

• <div><p>Your typical household tools will not cut a metal pipe. To cut a metal pipe, you&rsquo;d need more specialized tools like a pipe cutter or circular saw. Do not attempt to use these tools without taking proper safety precautions and wearing safety gear. It&rsquo;s usually safer to let a pro cut a metal pipe, especially if you&rsquo;re not confident in your skills with a heavy-duty saw. </p></div>

Q: How much does welding cost?

• <div><p>The average cost for a welding project is about $300, with typical costs ranging from $125 to $490. However, prices can be as low as $125 for very small jobs or exceed $1,200 for large or complex projects. Welders typically charge an hourly rate between $65 and $150, depending on their experience, and many charge a minimum fee to cover overhead and travel expenses. The total cost is influenced by several factors, including labor, the cost of materials like metal rods and shielding gas, the type of metal being welded, the project's size and complexity, and your geographic location. For a precise quote, it's best to ask a local welder for an estimate based on your specific project.</p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your welding project in Miami, OK?

Select your specific project to find the pro for you.

Verified Reviews for Welding pros in Miami, OK

*The Angi rating for Welding companies in Miami, OK is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Welding needs.

*The HomeAdvisor rating for Welding companies in Miami, OK is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Welding needs.

Last update on May 20, 2026

Reviewed in May 2026
I would recommend Crosby Roofing to anyone.
CROSBY'S ROOFING LLC
Request a quote
Reviewed in March 2026
Jason is a master of the crafts. I can't imagine getting this work done any better by anyone else. He should have charged me 10x more. From the roof to my basement his work has been incredible.
Screw It Up LLC
Request a quote
Reviewed in December 2025
Pro did work in above required manner. Built 2 porches decks stairs ra m ps and roofs.
One Sharp Fence
Request a quote
Reviewed in December 2024
Twisted H was very prompt , professional, and efficient. They walk you thru the process and work out any issues along the way. The work they do is exceptional. We have used them for several different jobs and very pleased with them all.
Twisted H Land Management LLC
Request a quote
Reviewed in September 2024
Iâ ve called many plumbers in the Miami Oklahoma area and they are the only ones that will answer their phone and return calls. They are also very affordable.
ROSS PLUMBING
Request a quote
Reviewed in September 2023
Great. Fixed problems a previous contractor we had hired that were done poorly.
Big R Handyman
Request a quote
Reviewed in April 2023
High quality work, with very reasonable pricing. You know that you are getting the best when you hire BK Power Washing.
BK Power Washing Services
Request a quote
Reviewed in March 2023
Wes with Beau the Builder was an awesome contractor from the start. Finished the job on time as scheduled. He always kept me informed of progress at end of each day. Highly recommend Beau the builder llc.
Beau the Builder
Request a quote
Reviewed in July 2022
found problem quickly good worker
Neely Mechanical Services
Request a quote
Reviewed in February 2022
Great contractor, knowledgeable, listened to my ideas and implemented them. Tough project that required an experienced operator. Price was a little on the high side, but the equipment rental is very expensive.
Mid-West Dirt Works LLC
Request a quote

Find Welders in Miami

Grand Lake Welding and Construction

5.0(

)

Serving Miami, OK and surrounding areas

Approved

Super Service Award Winner

In business since 2025

Free estimates

Offers commercial services

"Contracted Grand Lake Construction and Welding to weld various items for me. Jonathan did a fantastic job! I will continue to use this company for all my personal and business welding/fabrication needs!"

Response time1 day

Serving Miami, OK and surrounding areas

Approved

Super Service Award Winner

In business since 2021

Offers commercial services

Customers say: Quick response

"Grand Handyman is truly amazing. I reached out for one job with a dryer vent, and while he was here he ended up doing two more! Fixed a leaking toilet base and a broken fence gate. He handled every job with ease and I wish I could give him ten stars! He went above and beyond!"

Response time2 days

Response rate91%

18 neighbors recently requested a quote

Request Quote

Twisted Metal Welding and Fabrication

New to Angi

Serving Miami, OK and surrounding areas

Approved

Free estimates

Emergency services offered

Small jobs welcome

Twisted Metal Welding and Fabrication provides mobile welding, metal repair, and custom fabrication services. We specialize in strong, clean, and reliable welds done on-site or by request. From repairs and structural welding to custom metal work, we focus on quality craftsmanship, safety, and getting the job done right the first time.

Request Quote

Cameron Todd

New to Angi

Serving Miami, OK and surrounding areas

Approved

I am able to do welding projects, or deliveries with a pickup truck. Not really sure what all I would be willing to do, so just ask.

Serving Miami, OK and surrounding areas

Approved

In business since 2010

Free estimates

Credit card accepted

"Excellent response time, good communication, and good quality of work, would recommend and use again!"

Response time3 days

8 neighbors recently requested a quote

Recommended by75%of homeowners

Serving Miami, OK and surrounding areas

In business since 2021

Free estimates

Offers commercial services

"He has a great sense of humor. Welded where I needed him to weld. And he went far and beyond what was asked for him. Best worker Iâ ve seen in years"

Response time11 hrs

Recommended by100%of homeowners

Request Quote

Rafter BA Land Management & Welding

4.9(

)

Serving Miami, OK and surrounding areas

In business since 2014

Free estimates

Offers commercial services

"My wife and I were very pleased to find someone who took great pride in their work and regularly checked to see if we were happy with the work that was being done. Our land was extremely overgrown with trees and brush. Now itâ s looking amazing. I would highly recommend this service."

Response time20 mins

Recommended by83%of homeowners

Request Quote

Irondog Welding and Fabrication

4.8(

)

Serving Miami, OK and surrounding areas

In business since 2017

Free estimates

Credit card accepted

Irondog Welding and Fabrication is committed to excellence in every aspect of our business. We uphold a standard of integrity bound by fairness, honesty, and personal responsibility. Our distinction is the quality of service we bring to our customers. Accurate knowledge of our trade, combined with ability, is what makes us true professionals. Above all, we are watchful of our customers' interests and make their concerns the basis of our business. Please give us a call today!

Response time2 days

Response rate93%

Recommended by100%of homeowners

Request Quote

Baker's Custom Stone Manufacturing

5.0(

)

Serving Miami, OK and surrounding areas

In business since 2021

Free estimates

"We absolutely love our stonework. Baker's Custom Stone Manufacturing earned 5 stars in communication, timliness, quality, cleanliness, and price. We would highly recommend them for masonry of any kind."

+65

Recommended by100%of homeowners

Request Quote

Multicraft Erections LLC

5.0(

)

Serving Miami, OK and surrounding areas

Free estimates

Emergency services offered

Credit card accepted

"Josh was quick, efficient and did a good job. He followed up with a text a few days later to ensure the repair was working well for us. Would recommend."

+21

Recommended by100%of homeowners

Request Quote

Showing 1-10 of 39

Welding questions, answered by experts

Cutting rectangular ductwork requires careful measurements and the right technique. Use a measuring tape and pencil to mark the cutting lines accurately. Tin snips are excellent for straight cuts on smaller ducts. For more extensive or thicker rectangular ducts, a reciprocating saw with a metal-cutting blade is effective.

Ensure the duct is well-supported and secure while cutting to prevent wobbling and maintain precision. After cutting, use a metal file to smooth any sharp edges, ensuring safety during installation.

Cutting round ductwork requires precision and the right tools. A duct cutter, specifically designed for circular ducts, is ideal. First, mark the cutting line on the duct using a measuring tape and pencil. Then, position the duct cutter's blade on the marked line. Apply steady pressure, rotating the cutter around the duct. The sharp blade creates a clean, precise cut. Alternatively, a reciprocating saw with a metal-cutting blade can be used for larger round ducts. Ensure the duct is securely held in place while making the cut to prevent slips and maintain accuracy.

Welding is the process of using extreme heat—and, sometimes, pressure—to attach two pieces of metal. In contrast, metal fabrication is a more involved process that can include welding, sheet metal work, bending, and other forms of metal manipulation. Metal fabrication is a large-scale project that may or may not involve welding, while welding is more often a step in larger fabrication projects.

Your typical household tools will not cut a metal pipe. To cut a metal pipe, you’d need more specialized tools like a pipe cutter or circular saw. Do not attempt to use these tools without taking proper safety precautions and wearing safety gear. It’s usually safer to let a pro cut a metal pipe, especially if you’re not confident in your skills with a heavy-duty saw.

The average cost for a welding project is about $300, with typical costs ranging from $125 to $490. However, prices can be as low as $125 for very small jobs or exceed $1,200 for large or complex projects. Welders typically charge an hourly rate between $65 and $150, depending on their experience, and many charge a minimum fee to cover overhead and travel expenses. The total cost is influenced by several factors, including labor, the cost of materials like metal rods and shielding gas, the type of metal being welded, the project's size and complexity, and your geographic location. For a precise quote, it's best to ask a local welder for an estimate based on your specific project.

The Miami, OK homeowners’ guide to welding services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Angi
•
May 30, 2026May 30, 2026
How Much Does a Wrought Iron Railing Cost? [2026 Data]
Discover how much a wrought iron railing costs. Get detailed price breakdowns, installation factors, and tips to save on your new railing project.
Scott Dylan Westerlund
•
May 30, 2026May 30, 2026
How Much Does Sheet Metal Fabrication Cost? [2026 Data]
Get transparent sheet metal fabrication cost info for your project. Learn what impacts price, compare options, and plan your project with confidence.
Rachel Hoffman
•
May 30, 2026May 30, 2026
How Much Does Welding Cost? [2026 Data]
Get a clear estimate of welding cost for your next project. Learn what impacts welding prices, compare DIY vs. pro rates, and discover ways to save.
Angi
•
May 21, 2026May 21, 2026
How to Hire a Wrought Iron Fence Installer
Learn how to hire a wrought iron fence installer with confidence. Find qualified pros, ask the right questions, and get expert tips for your project.
Stephanie Mickelson
•
Apr 9, 2026Apr 9, 2026
14 Types of Pipe Fittings and Their Uses
Tee, cross, wye, elbow, coupling, bushing, adapter, union, and more. Know the most common 14 types of pipe fittings and what they are suited for.
Leah Lopez Cardenas
•
May 2, 2026May 2, 2026
How to Build and Install Metal Trusses in 4 Steps
Metal trusses give buildings like sheds and barns structure. While not a project for an average DIYer, here’s how to build metal trusses if you have roofing experience.