Best garbage collectors near Lexington, OK

When a dishwasher discharges its wastewater, it uses a pump to quickly move a lot of water. If anything in the drain line or the garbage disposal impedes the high volume of water, it will back up into the sink through the drain or the garbage disposal. Following regular dishwasher maintenance tips like clearing clogs, keeping them cleared, and occasionally running the disposal will eliminate the problem.

These appliances do unscrew, but you need to disconnect everything properly when you replace your garbage disposal. Make sure you shut the power off to the area first and check that it’s off with a voltage detector. Disconnect the main drain line and P-trap, and then disconnect the dishwasher drain line if you have one connected. You can then unscrew your garbage disposal using a disposal wrench. Just make sure you disconnect the electrical lines before removing your appliance.

Most garbage disposals have a reset button that can be triggered with a tool as simple and accessible as your index finger. That said, if you need to perform a more in-depth troubleshooting step, like manually moving the arms inside the unit or rotating the impeller plate, a hex wrench is the most common tool you’ll need. Most garbage disposals come with a hex wrench.

There are many maintenance and repair issues that lead to a malfunctioning garbage disposal. Regular clogs place wear and tear on the motors, leading to an eventual shutdown. Electrical issues at the breaker, wall outlet, or disposal itself can fry the unit. The most common cause is simply a worn-down motor. These motors can only handle so much use before powering down for good.