Best garage cleaning pros near Geronimo, OK

Always lock the door that separates your garage and your home. However, garage doors are seldom entrance points for thieves. It takes quite a bit of work and noise to pry open a garage door, so thieves often opt for windows or unlocked doors. Unless they have access to the motor which controls the door, as long as it's functioning properly you shouldn't worry too much about it.

While you can technically use WD-40 to lube a garage door, it is not the best option since the oil it leaves behind can attract dirt. Instead, go to the hardware store and locate a lithium- or silicone- based garage grease. You can also search for garage door lubricant online; just make sure you get one that is made with lithium or silicone.

A prefab, or prefabricated garage, requires far less construction work than one with a foundation and frame, but it’s not nearly as desirable and may not be a worthwhile option. A prefabricated garage won’t be as durable or long-lasting, and it doesn’t provide the same protection for your belongings and vehicles. Plus, you can use a standard garage for more uses—like living space—whereas a prefab garage only serves as a space for storage. Lastly, building a traditional garage will add to your home value, while a prefab garage usually won’t.

Yes, you can pressure wash epoxy floors, but you must take precautions to avoid damaging the surface. While most epoxy floors can be cleaned with a mop, you might choose to pressure wash if the floor is stained, has ground-in dirt, or is covered with mold or mildew. To do so safely, first soak any stains or dirty areas with a gentle cleanser. Use a lower pressure setting with a gentle nozzle, such as a green, white, or black tip, or a 45-degree angled tip. Keep the spray nozzle at least 18 inches away from the floor to protect the surface. Using a surface cleaner attachment or a rotary scrubber can also help prevent overspray. Be cautious if using a power washer that heats the water, as the combination of heat and pressure may be too powerful and could damage the epoxy coating.