Top-rated welders.

Get matched with top welders in Colbert, OK

Enter your zip and get matched with up to 5 pros

Need a pro for your welding project in Colbert, OK?

Select your specific project to find the pro for you.

Find Welders in Colbert

Landry Packard
5.0(
11
)
Metal Structure or Object - Weld or CutMetal Structure or Object - Create CustomSheet Metal and Ornamental Metal - Fabricate

Serving Colbert, OK and surrounding areas

Approved

In business since 2008

Free estimates

Credit card accepted

"Landry Packard did an outstanding job on the fencing/automated gate project we had on our land in Blue Ridge, Texas. Landry is extremely easy to work with and very professional. Our project included goat fencing/barbed wire across the top and 5 strand barbed wire through areas which were sometimes challenging. Landry and his family being ranchers themselves, understands how to adapt and overcome to give success to your project. We are extremely pleased with the final product and the scope of work which he provided! We highly recommend Landry Packard."
7 neighbors recently requested a quote
Recommended by100%of homeowners
Shepherd's Welding
5.0(
1
)
Metal Structure or Object - Create CustomMetal Stairs and Railings - RepairMetal Structure or Object - Weld or Cut+2 more

Serving Colbert, OK and surrounding areas

Approved

Free estimates

Emergency services offered

Small jobs welcome

"Jacob responded very quickly. I sent photos to him. His quote was 1/3 that of another Angi contractor quote. Once scheduled, he arrived on time and finished the job within a few hours. He explained the work before, during, and upon completion. Excellent work! I hope we don't need future fence repairs or welding but I'll call Jacob at Shepherds Welding if we do."
1 neighbors recently requested a quote
Avatar for Load Bearing Beam Masters
Load Bearing Beam Masters
5.0(
6
)
Steel Beams (Structural) - Install

Serving Colbert, OK and surrounding areas

Approved

In business since 2023

Free estimates

Emergency services offered

"I used Jordan & his team to remove a load bearing wall inbetween kitchen & livingroom. I was very impressed with the full process and would definitely recommend."
Response time4 hrs
9 neighbors recently requested a quote
Recommended by66%of homeowners
Avatar for Sharp Welding
Sharp Welding
New to Angi
Metal Structure or Object - Create CustomMetal Structure or Object - Weld or CutWrought Iron Fence - Repair or Weld

Serving Colbert, OK and surrounding areas

Approved

Emergency services offered

Warranties offered

Small jobs welcome

I have 30+ years experience in welding and fabrication. I have a very strong work ethic and stay goal oriented to complete the task. I am able to work on site. I am able to manage time and plan the job so that it is completed in the most efficient and productive manner. \n

Response time10 mins
Response rate100%
Buckin' A Welding
0.8(
2
)
Metal Stairs and Railings - RepairMetal Structure or Object - Create CustomSheet Metal and Ornamental Metal - Fabricate+3 more

Serving Colbert, OK and surrounding areas

Approved

Recently relocated to Grayson County. We've been serving Texas and other states for 13 years in building ground up commercial buildings, additions, and renovations. We specialize in structural steel fabrication and erection, custom steel fabrication, gates and entryways. We were designing and building Barndominiums before people knew what they were. We do the job right or not at all. We guarantee our work, and we often takeover failing or abandoned projects and get the project completed. We've built and have tore down and rebuilt many very large churches. We've done a lot of historical renovations and dealt woth the historical regulations, etc. We've done a lot of work at The Grandscape in The Colony Tx. We worked on The Dallas Morning News, The Statler Hotel as well as many other hotels, high end retail and entertainment districts. \n We have worked and a General contractor holding responsibility for a project from conception to planning and development, through completion.

A&W Welding
5.0(
1
)
Metal Stairs and Railings - RepairMetal Structure or Object - Create CustomMetal Structure or Object - Weld or Cut+3 more

Serving Colbert, OK and surrounding areas

In business since 2012

Free estimates

Credit card accepted

A&W Welding is committed to excellence in every aspect of our business. We uphold a standard of integrity bound by fairness, honesty, and personal responsibility. Our distinction is the quality of service we bring to our customers. Accurate knowledge of our trade combined with ability is what makes us true professionals. Above all, we are watchful of our customers' interests, and make their concerns the basis of our business.\n

Response time20 mins
Recommended by100%of homeowners
...
Showing 1-10 of 99
Welding questions, answered by experts

Sawing your hot tub into more manageable chunks so it can be lifted easily into a truck takes several hours. Generally, 2.5 hours for smaller hot tubs and around 4 hours for larger ones with the help of one to two people. If money isn't a concern and you want to skip the physical labor, you can hire a pro to get the job done.

Welding is the process of using extreme heat—and, sometimes, pressure—to attach two pieces of metal. In contrast, metal fabrication is a more involved process that can include welding, sheet metal work, bending, and other forms of metal manipulation. Metal fabrication is a large-scale project that may or may not involve welding, while welding is more often a step in larger fabrication projects.

Cutting round ductwork requires precision and the right tools. A duct cutter, specifically designed for circular ducts, is ideal. First, mark the cutting line on the duct using a measuring tape and pencil. Then, position the duct cutter's blade on the marked line. Apply steady pressure, rotating the cutter around the duct. The sharp blade creates a clean, precise cut. Alternatively, a reciprocating saw with a metal-cutting blade can be used for larger round ducts. Ensure the duct is securely held in place while making the cut to prevent slips and maintain accuracy.

While a high-speed circular saw will cut through metal, and even cut through multiple sheets at once, the fast-spinning saw blades create a lot of heat. This heat can damage paint and other protective coatings, leading to serious problems like rust over time. The cost to paint a metal roof again to avoid this damage is typically an additional $0.50 to $1 per square foot.

Choosing the right metal fabricator for your project begins with research. Find a reputable fabrication company by searching for reputable contractors in your area, and then reviewing photos of their previous work, customer reviews, and photos of the company’s workshop.

Once you’ve narrowed down the list, contact the companies to ask about the types of metal fabrication projects they specialize and inquire about guarantees and warranties on workmanship. You should also ensure the company uses high-quality material, and ask about the schedule and turnaround time for your proposed project.

The Colbert, OK homeowners’ guide to welding services

From average costs to expert advice, get all the answers you need to get your job done.