Top-rated sewer cleaners.

Get matched with top sewer cleaners in Beaver, OK

Enter your zip and get matched with up to 5 pros

Need a pro for your sewer cleaning project in Beaver, OK?

Select your specific project to find the pro for you.

Find Sewer cleaners in Beaver

Sewer Cleaning questions, answered by experts

While some chemical drain cleaners with hydrochloric acid can dissolve hair, this method is not recommended as it can also destroy your plumbing pipes. A common DIY alternative is using baking soda and vinegar, which can help break down the clog but will not actually dissolve the hair. The best and safest method for clearing a hair clog is to remove it manually. You can use a drain snake, a straightened wire hanger with pliers to fish out the clog, or have a plumber use a professional auger for more severe blockages.

First, find the cleanout pipe in your yard. Unscrew the cap—you may need a wrench to do so. Then, get a drain snake. You can use a non-motorized one, but a motorized snake will make the job a little easier. Feed the snake through the pipe until it reaches the clog. Spin the snake continuously, but don’t try to feed it through the pipe anymore. Keep spinning until you feel it break the clog apart.

You should not attempt to snake your sewer yourself. Accessing and snaking your sewer requires heavy-duty equipment, and while renting is possible, misusing it can damage your sewer main and leave you with very expensive repair costs, not to mention potential environmental issues and severe water damage. Accessing your sewer also exposes you to hazardous sewer gasses, and failing to seal the sewer properly after work can be very dangerous. It’s always best to hire a professional sewer cleaner near you to handle this type of work.

Depending on the home, wastewater either goes into a septic tank and seeps back into the backyard or is sent via sewer system to a local sewage-treatment plant. Septic systems naturally separate different components of the waste so that it can naturally and safely disperse it. They are usually reserved for homes not served by a municipal sewage department (like rural homes). A treatment plant, on the other hand, speeds up that process through screening and purification.

The cost to unclog a drain varies based on the location and severity of the clog. For simple clogs within your home, such as in a sink, toilet, or shower, hiring a plumber typically costs between $110 and $350, with an average of around $200. Snaking a toilet or sink usually costs between $110 and $275, while a bathtub or shower clog costs about $225.

For a more serious clog in the main sewer line, the cost is higher. Clearing a main line clog generally costs between $200 and $600, with an average of about $380. However, prices can range from as low as $100 for snaking a minor clog to over $1,600, particularly if advanced methods like video inspection and hydrojetting are needed for a large or hard-to-reach blockage. Some severe main line clogs can cost upwards of $1,000 to clear depending on factors like the cause of the clog, its distance from an accessible cleanout, and whether the pipe is located beneath an occupied space (e.g., in an apartment building). You may be able to save money on minor clogs by using a drain snake or bladder yourself.

The Beaver, OK homeowners’ guide to sewer cleaning services

From average costs to expert advice, get all the answers you need to get your job done.