Get matched with top roofers in Allen, OK

Furring strips (also called wood stripping) are not always necessary for a metal roof installation, but they are highly recommended and may be required by local building codes or the roofing manufacturer's specifications. There are several key reasons to use them:

• Energy Efficiency: Furring strips, made of wood or metal, create an air gap between the metal panels and the roof deck. This acts as a thermal break, reducing heat transfer into your home and improving overall energy efficiency.

• Moisture and Condensation Control: The air gap allows for better airflow, which helps prevent moisture buildup and condensation under the metal panels.

• Structural Support: They provide a solid, even frame to which you can attach the metal roofing panels.

It is especially important to use furring strips when installing a metal roof over existing shingles. Without them, the roof surface can be uneven, and you will experience greater solar heat gain.

You’re going to need a permit for nearly every roof-raising project. This is a very important step, as the work you’re doing has serious safety considerations. Professionals are the ones to handle this type of work—including sourcing the permits—as they have the expertise required to perform the work safely. Insurance and warranty are usually voided if you do this work without a permit, and you may even be required to halt construction and tear it down as a penalty for working without a building permit.

You shouldn’t put a new roof underlayment over an old one for a few reasons. Old felt must be removed in order to assess the condition of your roof decking, such as rotting wood or other structural issues. Also, if your roofer doesn't install a fresh layer of felt as is required by shingle manufacturers, your warranty may be voided. Finally, old underlayment removal is often included in the cost of roof repair or replacement, so there's no real benefit to leaving it on before installing a new layer.

When it comes to choosing the best roof color for a blue exterior, you have plenty of options. For a classic neutral look, go with a light gray, dark gray, or black roof. Blend gray tones if you want a more eye-catching look for your roof, or go for a different splash of color with a green or even red. Take inspiration from your neighbors if you want your house to fit in on the block.