Get matched with top gutter cleaning pros in Strasburg, OH

The most common problem with gutters is clogging from debris like leaves, blossoms, and seeds from surrounding trees. This debris can block downspouts, leading to improper drainage and water overflow.

Other common issues include:

• Leaks and holes, which can often be repaired with gutter sealant or caulk.

• Rust, sagging, or detachment from the roofline.

• Damage from strong storms.

• Improperly pitched gutters that don't drain correctly.

Regular cleaning in the spring and fall is the best way to prevent most of these problems. You may need to clean them more often during periods of heavy leaf fall.

Yes, gutters can still get clogged even with gutter guards installed. While guards significantly reduce the amount of debris that enters your gutters, they are not 100% effective.

Small debris such as pine needles, seedlings, algae, small leaves, and pebbles can pass through the guard's screen or mesh and accumulate over time. Clogs can also form if the guards themselves are not cleaned and become overwhelmed with debris on top, preventing water from entering the gutter.

If this buildup is neglected, it can lead to clogs, water leaks, mold growth, and even plants sprouting from the gutters. The primary benefit of gutter guards is not the complete elimination of maintenance, but a dramatic reduction in how often you need to perform it, often from several times a year to just once a year or less.

Gutters should be cleaned at least twice a year, in the spring and in the fall, to remove the debris from trees that can clog the eavestroughs and downspouts. Debris like leaves, twigs, and seed pods can build up and cause your gutters to overflow, potentially causing damage to your roof and foundation. Water backing up under the shingles can rot the edge of your roofline. Overflow water falling next to your foundation can end up leaking into your basement or crawl space.

Yes, you can use a pressure washer to effectively clean debris, dirt, and grime from your gutters, but it must be done with caution to avoid damage. Always use a low-pressure setting, with a recommended range between 1,200 and 1,800 PSI. Excessive pressure can bend or dent aluminum gutters, damage seams, peel paint, or even knock shingles off your roof, potentially leading to leaks and moisture issues. For a safer alternative, consider soft washing or cleaning them by hand. When using a pressure washer, it is safer to use gutter elbow extensions from the ground rather than climbing a ladder, as the force can cause instability. Due to the risks, you may want to hire a licensed and insured contractor for the job.