Get matched with top structural engineers in Rushville, NY

Q: Is it okay to drill into a load-bearing beam?

• <div><p>You should avoid drilling or cutting into load-bearing beams because removing material will weaken it and increase the risk of structural damage or even collapse. If you do need to drill into a load-bearing beam, speak with a structural engineer first to discuss where it&rsquo;s safest to drill and the width and depth of the bit that&rsquo;s safe to use.</p></div>

Q: What building materials are used in Neoclassical architecture?

• <div><p>Stone, marble, and brick are common building materials of Neoclassical architecture, though you will also find wood flooring and a range of natural stone tiles. Since several home styles fall under Neoclassical architects' umbrella, a range of building materials&mdash;including traditional wood framing&mdash;will make an appearance.</p></div>

Q: Can engineers provide solutions for structural problems found during inspections?

• <div><p>Yes, they offer plans for repairs or reinforcements to address issues.</p></div>

Q: Can termite damage affect home structural value?

• <div><p>Yes, unresolved damage can decrease property integrity and market value.</p></div>

Q: Are ceiling joists load-bearing?

• <div><p>Yes, ceiling joists are typically load-bearing. However, their primary function is to support the weight of the ceiling and loads applied to it, like lighting fixtures and ceiling fans. They can also help support the roof, especially if they&rsquo;re part of truss systems. Remember, the load-bearing capacity of ceiling joists depends on the material, size, and space between them. </p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your structural engineering project in Rushville, NY?

Select your specific project to find the pro for you.

Verified Reviews for Structural Engineering pros in Rushville, NY

*The Angi rating for Structural Engineering companies in Rushville, NY is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Structural Engineering needs.

*The HomeAdvisor rating for Structural Engineering companies in Rushville, NY is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Structural Engineering needs.

Last update on June 07, 2026

Reviewed in June 2026
So happy we chose R&D for our exterior wall repairs! they were great to work with throughout the process of what turned out to be a complicated issue. Their communication was really appreciated as they dug into things and problem solved some unique issues with how the previous home owners...
R&D Design Studio
Request a quote
Reviewed in June 2026
Very impressed with this business ! The workers were very thorough and did a great job . They made sure the cement wall was level and cleaned up afterwards . got a few different estimates and his was the most reasonable. HIGHLY recommend them!
AI Developers Masonry
Request a quote
Reviewed in July 2023
I learned a lot about aluminum siding and ionization.
Soft Wash Pro's
Request a quote
Reviewed in July 2023
David excavated and erected ICF blocks for a 500 sq. ft addition. He also supervised the concrete pour from start to finish. I am totally satisfied because there are no bows or bulges in the foundation. Everything is square and plumb. David paid attention detail and it showed in a masterful...
Patrick Design and Build
Request a quote
Reviewed in February 2022
Rich and his crew were great. Our roof was in bad shape and had been leaking for a while. Up Top did a bunch of structural work along with a full tear-off and re-shingling. They also did it in the snow. We felt their pricing was fair and that they did professional work. We&amp;#39;d...
Up Top Exteriors
Request a quote
Reviewed in October 2021
Bryan did a great job installing drapery rods. Very professional and courteous. Would definitely recommend him to others.
B More Decor
Request a quote
Reviewed in July 2019
Mike D&#39;Angelo installed our Briggs and Stratton standby generator system two years ago. Unfortunately, the engine had a manufacturing defect causing an intermittent failure. Mike worked closely with the manufacturer to solve the problem. Ultimately, the manufacturer replaced the unit...
Reliable Power Systems
Request a quote
Reviewed in August 2015
I had been going to Kost Tire (Mr. Tire) in Canandaigua for years to have tires mounted, wheels balanced ,etc., and never had a problem. So I decided to have them change the spark plugs in my Nissan Pathfinder when the engine started feeling sluggish. Big mistake.....immediately after the new...
KOST TIRE AUTO CARE
Request a quote
Reviewed in August 2015
Pretty pricey. They are very nice but get busy and then it seems quality goes down. I called the day after to report my engine was running even more roughly than when I had brought it in (you could see the stick shift shake pretty badly when stopped at a light). <br /> They said rather...
TROMBLEY TIRE & AUTO
Request a quote
Reviewed in August 2013
We purchased our house in Nov. 2012 and did not live there through the winter. In March 2013 we contacted Ron Roach of At Your Service Builders and hired him to finish an unfinished area of the home along with other work for $36,000. As Ron was preparing to start construction he discovered...
AYSB
Request a quote

Find Structural engineers in Rushville

Thornton Engineering, PC

5.0(

)

Serving Rushville, NY and surrounding areas

In business since 1960

"very positive. he was candid and knowledgable"

Recommended by100%of homeowners

Request Quote

Northshore Engineering and Design

5.0(

)

Serving Rushville, NY and surrounding areas

In business since 2012

Credit card accepted

"Very good quality work, custom design, knows the industry practice well. Happy with the final design."

Response time11 hrs

Recommended by100%of homeowners

Request Quote

Structural Engineering questions, answered by experts

You should avoid drilling or cutting into load-bearing beams because removing material will weaken it and increase the risk of structural damage or even collapse. If you do need to drill into a load-bearing beam, speak with a structural engineer first to discuss where it’s safest to drill and the width and depth of the bit that’s safe to use.

Stone, marble, and brick are common building materials of Neoclassical architecture, though you will also find wood flooring and a range of natural stone tiles. Since several home styles fall under Neoclassical architects' umbrella, a range of building materials—including traditional wood framing—will make an appearance.

Yes, they offer plans for repairs or reinforcements to address issues.

Yes, unresolved damage can decrease property integrity and market value.

Yes, ceiling joists are typically load-bearing. However, their primary function is to support the weight of the ceiling and loads applied to it, like lighting fixtures and ceiling fans. They can also help support the roof, especially if they’re part of truss systems. Remember, the load-bearing capacity of ceiling joists depends on the material, size, and space between them.

The Rushville, NY homeowners’ guide to structural engineering services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Haley Nothstein
•
May 30, 2026May 30, 2026
How Much Does It Cost to Replace a Main House Support Beam? [2026 Data]
A damaged main support beam can cause serious structural damage to your house. Learn how much it costs to replace a main house support beam.
Lyle Hendriks
•
May 5, 2026May 5, 2026
How Much Does Beam Installation Cost [2026 Data]
Beam installation costs are an important consideration if you’re building a home or doing renovations. Learn about average costs and factors in this guide.
Timothy Moore
•
May 30, 2026May 30, 2026
How Much Does It Cost to Install an LVL Beam? [2026 Data]
Looking to remove load-bearing walls and vertical supports to open up your living space? Learn about what affects the cost to install an LVL beam.
Kyle Schurman
•
Mar 19, 2026Mar 19, 2026
Who to Hire to Replace a Sill Plate?
A sill plate needs to be replaced when it starts to rot out. Use this guide to help you know who to hire to replace a sill plate at your home.
Em Norton
•
May 5, 2026May 5, 2026
How to Hire a Structural Engineer: Complete Guide
It can be hard to choose the right pro for any job, but it matters. Learn how to hire a structural engineer who'll get the job done right from start to finish.
Em Norton
•
Apr 10, 2026Apr 10, 2026
Everything to Know About LVL Beams
What is an LVL beam? Read about LVL beams to determine if this material is safe and suitable for your project.