"Mr. Ferrell first connected his computer to my computer via internet and worked for quite a few hours trying to determine what exactly was wrong. The next day he continued working from his computer for several hours. He determined he would have to have my desktop tower to complete the repair. He and my son met in Huntsville to exchange the tower. He then cleaned up a lot of what was wrong and reloaded Windows 10. He deleted the D: drive which had way too much memory allotted to it. The tower was returned and I plugged it all back together and it is working better than it did when I first purchased it. I would use him again and I recommend him highly to anyone needing computer updating and/or repair. His work is warrantied and he is very personable, knowledgeable, and helpful."
If your door has interchangeable inserts, you’ll likely want to swap the glass out for a screen during the summer months. The process to do so will vary by door, but you’ll follow these general steps: First, use a flathead screwdriver to pop out the retainer strips—the plastic strips running down both long (and sometimes all four) sides of the door. Then gently pull them out by hand. Carefully remove the glass insert from the door and replace it with the screen. Finally, push the plastic retainer strips back into place, working from top to bottom.
There are different types of screen materials available when purchasing a screen door, but the two main options are fiberglass and aluminum. Fiberglass is lightweight and affordable, but can stretch out, so it needs to be replaced more often. Aluminum has a higher upfront cost, but is more sturdy. Aluminum can be more difficult to install, even if you know how to replace screen door mesh.
Yes, you can add a screen door to most door frames. The screen should be able to fit standard-size door frames, so unless you have an unusually sized door, you shouldn’t have an issue. Just make sure to properly measure the frame. When in doubt, it’s best to let a pro take care of this task for you so it’s installed correctly.
If you’re not an experienced DIYer, consider hiring a local patio repair contractor to rescreen your porch or sunroom. Unless you’re only repairing a small rip or hole, this project is not an easy job. A professional can also make recommendations for materials that will work best for your porch.
The screen material you choose depends on your needs. Here are some differences to consider:
Fiberglass is the least expensive but needs replacing more often.
Aluminum suits almost any job and doesn’t stretch as easily as fiberglass.
Pet-resistant screens are more expensive than fiberglass or aluminum, but they’re also wind and weather-resistant.
Metal screens, like stainless steel, are the most expensive material for rescreening your porch or sunroom. However, they last for years and are golf ball-resistant.
The Hondo, NM homeowners’ guide to screen repairs
From average costs to expert advice, get all the answers you need to get your job done.
You’re probably already using them, but when it comes down to it, do you need screens on your windows? Learn about the pros and cons of using window screens.
