Get matched with top buffing and polishing pros in Acoma Pueblo, NM

If you would rather use vinegar to clean the stone fireplace instead of dish soap, this mixture should work fine. Vinegar is slightly acidic, however, so it may etch some kinds of stone without quite a bit of diluting. For a stone fireplace, dilute it to about one cup of vinegar for every gallon of hot water. It’s a smart idea to test the diluted mixture in an inconspicuous area of the fireplace and watch for etching. You can use vinegar to clean quite a few different items around your home, and it’s especially good at removing stains.

To remove cloudiness from marble, use equal parts baking soda and water to form a paste. Apply it to the surface, allow it to sit for at least two hours, then wipe with a microfiber cloth. Another option is adding a couple of dish soap drops to warm water and wiping the surface after you’ve applied it to the surface. You may also consider using a liquid stone cleaner.

A mason lays brick or stone together, sometimes with mortar in between the bricks and stones, and sometimes without mortar, also called a dry-stack or surface bonding. Examples of work masons do include:

• Brick, stone, or cement block houses and buildings

• Freestanding stone or brick walls

• Chimneys with wood-burning fireplaces

• Cement block basement or crawl space walls

No, minor quartz stains are usually not permanent. Addressing spills on your countertop quickly can prevent the stain from worsening. Any remaining stains can generally be removed with a quartz-safe cleaner or a mixture of dish soap and water applied with a soft microfiber cloth. Severe stains may need professional treatment—and, in severe cases, countertop repair or replacement.