Get matched with top gate repair pros in Towner, ND

Double gates come with the same gaps as single gates, with hinges taking up a quarter of an inch of space. The difference is that double fence gates also have a center gap, which needs a little more clearance. Space the center gap at half an inch instead of the usual three-eighths of an inch for a single gate. 

The most common cause of gate sensors not working is damaged wiring. Only a professional should diagnose this because it requires working with the system's electronics. There are safety concerns, but more than that, you don't want to accidentally short out your system or cause any electrical damage. Insects, rodents, and fallen branches are common reasons your wiring could become damaged. 

In most cases, you will need a permit to install a new driveway or property gate. An exception might be if you are simply replacing an existing gate. Before issuing a permit, your local municipality may require a site plan or survey to verify property lines and prevent encroachment on a neighbor's property. Permits for a gate typically cost under $100. Be aware that corner properties may have additional restrictions on gate height or style. It's wise to confirm permit requirements with your local building department or your gate installation company, which can usually handle the entire permitting process for you.

Automatic gates don’t use too much electricity, and you should see a minimal effect on your utility bill. In fact, certain gate systems are entirely self-sufficient and rely on solar panels attached to or near the gate to power the motor. While a gate is large and there is a powerful motor moving it, it’s not something that sees constant use throughout the day. For most automatic gates, expect to see a utility bill increase of only around $10 per month.