Get matched with top gate repair pros in Mandaree, ND

The most common cause of gate sensors not working is damaged wiring. Only a professional should diagnose this because it requires working with the system's electronics. There are safety concerns, but more than that, you don't want to accidentally short out your system or cause any electrical damage. Insects, rodents, and fallen branches are common reasons your wiring could become damaged. 

In most cases, you will need a permit to install a new driveway or property gate. An exception might be if you are simply replacing an existing gate. Before issuing a permit, your local municipality may require a site plan or survey to verify property lines and prevent encroachment on a neighbor's property. Permits for a gate typically cost under $100. Be aware that corner properties may have additional restrictions on gate height or style. It's wise to confirm permit requirements with your local building department or your gate installation company, which can usually handle the entire permitting process for you.

Double gates come with the same gaps as single gates, with hinges taking up a quarter of an inch of space. The difference is that double fence gates also have a center gap, which needs a little more clearance. Space the center gap at half an inch instead of the usual three-eighths of an inch for a single gate. 

The obvious disadvantage of an automatic gate is that it runs on electricity. If the power goes out, it won’t open or close unless there’s a manual override. Many homeowners will need a backup generator so they don’t get stuck on either side of the gate, particularly when looking to park a vehicle. Automatic gates are also much more complicated than manual gates, with tech-heavy components that make them more expensive to repair.