Get matched with top garbage collectors in Mount Gilead, NC

On average, it takes one to four hours for a professional to install a garbage disposal. This includes removing the old unit, taking necessary measurements for positioning, removing and fitting new pipes, and installing the brand-new disposal system. If there are unforeseen issues, such as accessibility concerns, the process takes longer.

Once you have your garbage disposal disconnected, you can remove the mounting bracket by unscrewing the bolts that are holding the bracket. You can back them out just enough to pop off the snap ring, which prevents the bottom portion of the bracket from disconnecting from the top when you unscrew the bolts. Use a regular screwdriver to pop off the snap ring, and the rest of the components should fall off by themselves.

Whether it's worth repairing your garbage disposal depends on its age and the specific problem. Generally, if the unit is eight years old or younger, repair is a good option. For minor issues like a bad seal or a simple jam, a repair can be inexpensive, sometimes under $10. However, if the motor is broken (a repair that can cost $150 or more) or the unit is getting old, it's often more cost-effective to replace the entire disposal.

These appliances do unscrew, but you need to disconnect everything properly when you replace your garbage disposal. Make sure you shut the power off to the area first and check that it’s off with a voltage detector. Disconnect the main drain line and P-trap, and then disconnect the dishwasher drain line if you have one connected. You can then unscrew your garbage disposal using a disposal wrench. Just make sure you disconnect the electrical lines before removing your appliance.