Get matched with top pool table assembly pros in Three Forks, MT

You can place a pool alarm on the surface of the water or mounter underwater with motion detectors. Alarms placed on the surface will alert you if it detects wave movement. If mounted below the surface, known as "sub-surface,” the alarm detects changes in water pressure.

There are some disadvantages to a salt water pool. Besides costing slightly more than chlorine pools, salt water pools require a lot of salt. It's also harder to find a professional with salt water pool experience to do minor maintenance and repairs. Salt water can also damage some materials, so you’ll need to use specific heating, fixtures, lighting, liners, and masonry when building a salt water pool.

Detecting a leak in your pool costs about $300 on average. The price ranges widely from low $100 up to $1,000. Here are the costs involved in leak detection services for your pool:

• Pool inspection: $125–$250

• Above ground pool leak detection: $100–$700

• Inground pool leak detection: $400–1,000

• Vinyl liner repair: $350–$3,600

• Fiberglass lining repair: $300–$400

• Concrete liner repair: $75 per linear foot

• Pressure test pool lines: $200–$500

• Skimmer repair: $100–$250

• Main drain repair: $400–$700

• Pump repair: $50–$300

• Tile repair: $20-$30 per linear foot

Infinity pools do require slightly more maintenance than other pools because you’ll need to constantly monitor the water level. If the water level is out of whack, it won’t correctly flow over the edge, which gives the pool its infinity look. 

That said, the rest of the maintenance is largely dependent on the type of material you choose. Concrete needs a little extra care to prevent algae growth, and you will eventually need to resurface it. Fiberglass and vinyl liners are algae-resistant but they’re not as durable.