Top-rated stucco pros.

Get matched with top stucco pros in Jordan, MT

Enter your zip and get matched with up to 5 pros

Need a pro for your stucco service project in Jordan, MT?

Select your specific project to find the pro for you.

Find Stucco pros in Jordan

Allen's Siding & Windows, Inc.
New to Angi
Synthetic Stucco - Install or Completely ReplaceTraditional Stucco - Install or Completely ReplaceTraditional Stucco - Repair or Partially Replace

Serving Jordan, MT and surrounding areas

In business since 1988

Allen's Siding & Windows, Inc., is a Full Service,Owner Operated Company for over 17 years in complete exterior home improvements from custom design additions, sunrooms, patios, and decks to complete siding and window installations and repairs as well as all exterior window treatments including custom shutters and awnings. We specialize in ALSIDE ULTRAMAX Windows, which have been energy star partner for 3 years running. We work with you from start to finish with complete client focus, and professional personalized service giving superior craftsmanship with attention to each detail to ensure we create the vision you have for your home. Hire The Contractor not a Salesman. Please see our website at www.sydngys.com

Stucco questions, answered by experts

The best exterior paint finish for stucco is a flat or low-gloss finish. A high-gloss finish will show imperfections in the stucco and give it a candy-coated look that many homeowners don’t like. The best types of exterior paint to use on stucco are acrylic, masonry, and elastomeric. However, acrylic is recommended because it is both durable and breathable.

Masonry screws are the best option to be used on stucco. They’re thicker and made to penetrate harder surfaces like concrete and cinder blocks. Fluted masonry screws work the best because they create a stronger grasp thanks to the lines on their shafts. If you’re working on exterior stucco, use galvanized screws to prevent corrosion.

The decision to repair or replace stucco depends on the extent of the damage. For minor issues like small cracks, holes, dirt, stains, or discoloration, a repair is typically sufficient and more cost-effective. These issues can often be resolved with a simple repair, a deep clean, and possibly a new coat of paint. However, for more significant problems such as large cracks, peeling, mold, algae, or structural water damage, a replacement might be necessary. In these cases, it is best to call a professional stucco contractor for an inspection. An expert can assess the severity of the damage, determine if there are deeper issues, and advise whether a repair is adequate or if replacing a section or an entire wall is the more cost-effective, long-term solution.

Stucco will dry in two to three days, but you should wait one to two months to allow it to cure fully before you paint it. The curing process is slow, but leaving the material exposed to air and natural moisture will help it reach its maximum strength. If you live in a hot, arid climate, wait a month before painting. Wait two months before painting if you live in a more moderate or wet climate.

A standard drill will work just fine if you’re drilling small holes, and only a few of them. But anything with a diameter larger than 3/8 inch is best done with a hammer drill, since it is stronger, faster, and also makes your drill bits last longer. While you don’t absolutely need a hammer drill for stucco, it is a worthy investment if you think you might drill more holes down the road.

The Jordan, MT homeowners’ guide to stucco services

From average costs to expert advice, get all the answers you need to get your job done.