Get matched with top dryer vent cleaners in Emigrant, MT

Yes, most services include ductwork and venting to ensure adequate airflow. Confirm with your contractor.

Using a leaf blower to clean your dryer vent isn't a good idea. Theoretically, the leaf blower should push the lint and debris toward the exterior vent opening, helping it exit. That's usually not what happens, though. 

Instead, the lint can get stuck further in the vent, creating a blockage and making the problem worse. You need a scrubbing tool, such as the rotating brush head on a dryer cleaning kit, to push the lint out of the ductwork.

You’ll find the backdraft damper near the top of the range hood (where it connects to the ductwork). However, some range hoods also have a second damper, which is located close to the roof or exterior wall where the ductwork ends. If you don’t see a damper in either of these places, you might not have one.

The length of an allowable dryer vent varies based on the local building codes and regulations. Typically, the maximum range is 25 to 35 feet. However, if the vent must have any 90-degree turns, you may see a reduction of five feet from the maximum. Some municipalities may have no specific maximum allowable length as part of the code. Typically, installers will run the vent over the shortest possible distance for safety. The dryer vent cleaning cost is less with a shorter vent length as well.