Do you nail or screw composite decking?

• <div><p>You can nail or screw composite decking, but 3-inch decking screws are the better fastener choice. Unlike nails, decking screws won’t back out of the composite material over time. There’s also little danger of splitting composite material when driving screws, so you don’t need to pre-drill holes unless otherwise recommended by your decking manufacturer. </p></div>

What is the standard height and width of deck stairs?

• <div><p>Most building codes list a minimum width of <b>36 inches</b> and a maximum height of <b>7¾ inches</b>. However, for the most comfort and spaciousness, you’ll want to aim for a width of at least 48 inches and a height of 7 inches. Again, it’s always a good idea to base your numbers off steps that you already use comfortably. </p></div>

Get matched with top deck maintenance specialists in Chinook, MT

Q: Can I use deck pier blocks as an alternative to traditional deck footings?

• <div><p>Yes, deck pier blocks can be used as an alternative to traditional deck footings, particularly for small or low-to-the-ground decks. Unlike poured concrete and buried post footings, deck blocks don&rsquo;t require digging or pouring. However, their use is regulated by local building codes, and they may not be permitted in areas prone to high winds, earthquakes, or hurricanes. Always consult your local building codes before choosing them for your deck project.</p></div>

Q: What is the standard spacing for railing spindles or balusters?

• <div><p>Most building codes require that railing spindles (also known as balusters) on decks or stairs be spaced no more than four inches apart. This safety standard is often called the '4-inch sphere rule,' which means a sphere with a 4-inch diameter should not be able to pass through the opening between balusters. This rule is in place to prevent small children and pets from slipping through the railing. For the same reason, the space between the bottom rail and the deck or floor surface should also be no more than four inches. As a general guideline, professionals often install three balusters per foot of railing. However, since specific requirements can vary by location, it is essential to check your local building codes to ensure compliance before starting your project.</p></div>

Q: Is pressure-treated decking worth it?

• <div><p>Pressure-treated decking may be worth it if you want a natural, insect- and rot-resistant decking material that will last for decades with proper maintenance. As such, it&rsquo;s a much better option than untreated pine. Alternative wood decking materials like cedar and redwood tend to be less durable and more expensive. Some homeowners prefer <a href="https://www.angi.com/articles/which-best-decking-material-wood-or-composite.htm">composite decking</a>, which is a low-maintenance alternative to wood but is also more costly.</p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your deck maintenance project in Chinook, MT?

Select your specific project to find the pro for you.

Verified Reviews for Deck Maintenance pros in Chinook, MT

*The Angi rating for Deck Maintenance companies in Chinook, MT is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Deck Maintenance needs.

*The HomeAdvisor rating for Deck Maintenance companies in Chinook, MT is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Deck Maintenance needs.

Last update on June 04, 2023

Reviewed in June 2023
Awesome job . From start to finish: prompt, organized, efficient, respectful, hard working, complete cleanup. New chimney and roof, professional job ,nice work. Give them a call.
Spartan Gutter Guards
Request a quote
Reviewed in April 2019
Matt was prompt, efficient, clean, and did excellent work both painting the exterior of our home and advising us on color selection. The price was reasonable and he didn't ask for any up front money. He completed the job, we inspected it together, and we paid him. Just like it should be....
Manera's Mountain Painting, LLC
Request a quote
Reviewed in August 2015
Amazingly hard workers totally refurbished our entire yard, flowerbeds, under deck, etc. So impressed that we will definitely hire them again for any future yard projects. In addition, will be calling them back to winterize and for future yard care.
Garcia Lawn Service
Request a quote
Reviewed in July 2013
They did a really good job i am very pleased.
Castle Rock Roofing And Painting
Request a quote
Reviewed in March 2012
Overcast Restoration has always provided our family with high quality carpet cleaning services and we would definately recommend them for any job, big or small.
Overcast Restoration Inc
Request a quote
Reviewed in February 2012
He is very good. Have used him for years to replace toilets, hot water heaters, repiping and other jobs. <br /> Prices are pretty reasonable. <br /> Responsiveness is very good, and comes when he says he will come.
Rrr Plumbling
Request a quote

Find Deck maintenance specialists in Chinook

Beartracks Construction, LLC

New to Angi

Deck, Fence, Patio or Porch - Clean and Seal

Serving Chinook, MT and surrounding areas

In business since 2008

We have over 20 years of experience in home repair and renovations. Customers come first, with quality and efficient work. When it comes to remodeling, deck building, and all other home repairs, Beartracks Construction, LLC, are the contractors you need. Give us a call today!

Request Quote

Big Time Movers

New to Angi

Deck, Fence, Patio or Porch - Clean and SealDeck, Fence, Patio or Porch - Clean and Seal - For Business

Serving Chinook, MT and surrounding areas

Free estimates

Credit card accepted

* 5 star ⭐️⭐️⭐️⭐️ \n White glove Movers / transport /freight / junk removal *\nWe offer the best service ‼️\n⚫️Furniture \n⚫️ Packing\n⚫️Assemble\n⚫️ Car hauling\n⚫️Affordable prices\n⚫️Provide Packing\n⚫️Free Qoutes\n\nTreat each member as family?\n\nLocal & Long distance?\n\nNo Job to Big or Small ‼️\n\nCall Now ? 863-266-1850\n\n\nThe big time movers are here to make your moving experience peaceful in calm ? -Any assembly, dissassembly, all moving pads straps, dollys & travel time ALL INCLUDED IN PRICE\n-NO HIDDEN FEES\n-We offer "free haul away", we will take any unwanted furniture at NO ADDITIONAL COST TO YOU!!\n-We do both residential & commercial moves\n-Proffessional & Honest\n-Punctual & Reliable\n-We offer furniture protection (you only pay extra for supplies)\n-We move apartments, homes, offices, warehouses & even malls!\n-We offer junk removal services (enough to fill a pick-up truck, van, or box truck)\n-Long or short distance moves

Request Quote

Allen's Siding & Windows, Inc.

New to Angi

Deck, Fence, Patio or Porch - Clean and Seal

Serving Chinook, MT and surrounding areas

In business since 1988

Allen's Siding & Windows, Inc., is a Full Service,Owner Operated Company for over 17 years in complete exterior home improvements from custom design additions, sunrooms, patios, and decks to complete siding and window installations and repairs as well as all exterior window treatments including custom shutters and awnings. We specialize in ALSIDE ULTRAMAX Windows, which have been energy star partner for 3 years running. We work with you from start to finish with complete client focus, and professional personalized service giving superior craftsmanship with attention to each detail to ensure we create the vision you have for your home. Hire The Contractor not a Salesman. Please see our website at www.sydngys.com

Request Quote

Steve brown

New to Angi

Deck, Fence, Patio or Porch - Clean and SealDeck, Fence, Patio or Porch - Clean and Seal - For Business

Serving Chinook, MT and surrounding areas

In business since 2019

Free estimates

Ranch work \nWell experienced

Request Quote

Deck Maintenance questions, answered by experts

You can nail or screw composite decking, but 3-inch decking screws are the better fastener choice. Unlike nails, decking screws won’t back out of the composite material over time. There’s also little danger of splitting composite material when driving screws, so you don’t need to pre-drill holes unless otherwise recommended by your decking manufacturer.

Most building codes list a minimum width of 36 inches and a maximum height of 7¾ inches. However, for the most comfort and spaciousness, you’ll want to aim for a width of at least 48 inches and a height of 7 inches. Again, it’s always a good idea to base your numbers off steps that you already use comfortably.

Yes, deck pier blocks can be used as an alternative to traditional deck footings, particularly for small or low-to-the-ground decks. Unlike poured concrete and buried post footings, deck blocks don’t require digging or pouring. However, their use is regulated by local building codes, and they may not be permitted in areas prone to high winds, earthquakes, or hurricanes. Always consult your local building codes before choosing them for your deck project.

Most building codes require that railing spindles (also known as balusters) on decks or stairs be spaced no more than four inches apart. This safety standard is often called the '4-inch sphere rule,' which means a sphere with a 4-inch diameter should not be able to pass through the opening between balusters. This rule is in place to prevent small children and pets from slipping through the railing. For the same reason, the space between the bottom rail and the deck or floor surface should also be no more than four inches. As a general guideline, professionals often install three balusters per foot of railing. However, since specific requirements can vary by location, it is essential to check your local building codes to ensure compliance before starting your project.

Pressure-treated decking may be worth it if you want a natural, insect- and rot-resistant decking material that will last for decades with proper maintenance. As such, it’s a much better option than untreated pine. Alternative wood decking materials like cedar and redwood tend to be less durable and more expensive. Some homeowners prefer composite decking, which is a low-maintenance alternative to wood but is also more costly.

The Chinook, MT homeowners’ guide to deck maintenance services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Mitchell Grant
•
Jul 9, 2026Jul 9, 2026
How Much Does It Cost to Paint a Pool Deck? [2026 Data]
The cost to paint a pool deck depends on the dimensions and material, the type of paint, and whether you DIY. Read on to help determine a project budget.
Xiao Faria daCunha
•
Jul 9, 2026Jul 9, 2026
How Much Does Under-Deck Drainage Cost? [2026 Data]
Under-deck drainage costs can be pricey. Your final quote will depend on labor, materials, and the size of your deck. Start budgeting with this guide.
Angi
•
May 30, 2026May 30, 2026
How Much Does Steel Deck Framing Cost? [2026 Data]
Discover steel deck framing costs, including material, labor, and installation factors. Learn how to budget and choose the best option for your home project.
Jenna Jonaitis
•
Jul 9, 2026Jul 9, 2026
Top Deck Maintenance Tips for Every Decking Material
Deck maintenance is vital to protecting a wooden deck. Cleaning, staining and sealing a deck after pressure washing will add years to its lifespan. Protect a deck by following these deck maintenance tips for cedar and other types of wood materials.
Lawrence Bonk
•
Mar 19, 2026Mar 19, 2026
Deck Maintenance Checklists for Every Season
Keep your decking looking new with this deck maintenance checklist.
Deirdre Sullivan
•
Jul 31, 2026Jul 31, 2026
7 Best Maintenance-Free Decking Materials
Finding maintenance-free decking that works for your home, budget, and lifestyle can be challenging. This guide lists the 7 best low-maintenance deck materials.