Get matched with top garage cleaning pros in Boulder, MT

No, there should not be a gap between your garage door and the floor. Gaps can make your garage less energy efficient, leading to higher energy bills. They also create an entry point for pests like rodents and insects, as well as rain and melted snow, which can lead to foundation damage or mold issues.

If you have a gap under your garage door, potential causes include an uneven garage floor or worn-out weather stripping. To fix it, you can try several solutions:

• Replace the weather stripping: The seal at the bottom of the door may need to be replaced.

• Adjust the garage door: You may be able to adjust the closing position on your garage door opener to eliminate the gap.

• Inspect the floor: If the concrete floor has shifted or is uneven, it may need to be repaired to create a level surface.

If these solutions do not resolve the issue, it is best to call a garage door repair specialist to inspect the door and floor.

Garage door freezing is prompted by snowfall and freeze/thaw cycles instead of the temperature. If you get a lot of moisture around the garage door, whether from rain or melting snow, and temperatures quickly drop below freezing (32 degrees Fahrenheit) at night, that’s a recipe for a frozen garage door. Winters with steep temperature drops overnight are more likely to create this problem, especially low temperatures to sustain a freeze, so weather in the lower 20s is a common culprit.

It can take anywhere from a couple of hours to a day or two to clean out a garage. Times vary depending on the garage size, accessibility, and the amount and type of items that need sorting and lifting. A triple-car garage full of decades of clutter will take much longer to clear than a single garage with just a few unwanted bulky items.

It is highly recommended to prime a metal surface, like a garage door, before painting. Primer creates a stable surface for the paint to adhere to, which helps prevent bubbling, chipping, and peeling. This ensures the paint job will last longer. Painting metal without a primer can lead to poor adhesion and allow rust to bleed through the new paint. If the surface already has rust spots, you can cover them with a zinc chromate primer before applying the final coat. While priming adds an extra step and cost, it is a worthwhile investment for a durable, long-lasting finish. For best results, also use a paint specifically designed for metal.