Best basement waterproofing pros near Tremont, MS

Brick is designed to absorb moisture, but it is also designed to let it evaporate as well. So in general, the goal shouldn’t necessarily be keeping moisture out but making sure it has the room to breathe. If you have excess moisture getting through your brick wall, it’s more likely that you have a crack or other issue at play that a typical sealant won’t fix. So, instead of investing in sealant, try repairing your brick wall instead.

While a standard gutter system is widely considered the most effective way to prevent water damage to your home's foundation, several alternatives are available. These options can be used on their own in certain climates or as supplementary protection.

Common alternatives include:

• Rain Chains: These are decorative chains that hang from the roof's edge, guiding rainwater to the ground.

• Drip Edges: These metal strips are installed at the edge of the roof to direct water away from the fascia. While often used with gutters, they can be paired with a ground-level solution but are typically not sufficient on their own.

• Rain Dispersal Systems: These systems work by breaking up the heavy sheet of water flowing off the roof, dispersing it over a wider area.

• French Drains: This ground-level system uses a perforated pipe in a gravel-filled trench to collect and redirect water runoff away from the house.

• Drip Paths: Placed directly below the roofline, these paths made of concrete, stone, or other materials prevent soil erosion and guide water away.

It's important to note that some alternatives like rain chains and dispersal systems may not be adequate in regions with heavy rainfall because they don't divert water away from the foundation as effectively as a full gutter system. Ground-based solutions like French drains can be very effective but are often more expensive and can affect your landscaping and curb appeal. Many experts recommend installing a full gutter system for maximum protection and using alternatives as supplementary measures.

Mold and other fungi love moisture, so the best way to prevent mold growth after water damage is to remove as much moisture as possible. First, find the source of the water or moisture, such as a leak or clogged gutters, and correct the problem. Next, remove standing water, vacuum up puddles with a shop vacuum, and run blower fans and dehumidifiers for 24 to 72 hours. Once you've removed all traces of moisture, disinfect the area using either vinegar or bleach to kill any remaining mold spores.

If your basement often leaks after heavy rain, it’s probably caused by hydrostatic pressure. When the ground is saturated with water, it can put pressure on the exterior of your home’s foundation, causing cracks in the basement wall and pushing water through any existing weak spots. Over time, hydrostatic pressure can cause structural damage to your home.