Get matched with top flooring contractors in Starkville, MS

Installing carpet over carpet may affect the warranty of the new carpet. Check with the manufacturer or retailer regarding their warranty policies. Many warranties stipulate specific installation guidelines, and installing carpet over carpet may not comply with these requirements. Voiding the warranty due to improper installation methods can leave you without help in case of issues or defects with the new carpet.

Dry rot or severe water damage may warrant a replacement, but you don’t always need to replace damaged subflooring. If your subfloor has warped because it was installed incorrectly, you can sometimes shim the panels (in other words, add a thin, wedge-shaped piece of wood to level the surface). If your subfloor bows upward, you may be able to sand it down at the joist so it’s level, depending on the extent of the damage.

While it is possible to install carpet yourself, it is a challenging DIY project that requires precise measurement, proper cutting skills, and knowledge of correct installation techniques. The process involves multiple steps, including removing old flooring, installing underlayment and tack strips, and stretching the carpet to prevent wrinkles, which can take several days to complete.

Before starting, consider these factors:

• Warranty: Many manufacturers' warranties are voided if the carpet is not installed by a professional.

• Tools: You will need to buy or rent specialized equipment like a knee kicker, carpet stretcher, and seam roller.

• Complexity: DIY installation is most suitable for simple, straightforward rooms. Projects involving stairs or floor vents are significantly more difficult.

• Cost: While you can save on labor, the cost of tools plus the risk of expensive mistakes—which may require re-installation—can make hiring a professional more cost-effective in the long run.

Given the potential for errors, voided warranties, and the need for special tools, hiring a local carpet installer is often recommended to ensure the job is done correctly and safely.

If the stairs are already covered in carpet, you will need to remove the old carpet and possibly the carpet pad. Any damage to the stairs like cracks, loose boards, or creaky treads may also need to be repaired. You may also want to sand and refinish or paint wood stairs before installing a carpet runner.